Information technology - Open Systems Interconnection - Conformance test suite for the ACSE protocol...
The conformance test suites based on this part are designed for use by: test laboratories which provide a conforming testing service for the ACSE protocol; test realizers; implementors of the ACSE protocol. Annexes A and B are for information only.
Information technology — Open Systems Interconnection — Conformance test suite for the ACSE protocol...
The conformance test suites based on this part are designed for use by: test laboratories which provide a conforming testing service for the ACSE protocol; test realizers; implementors of the ACSE protocol. Annexes A and B are for information only.
Norme relative aux systèmes de récupération des vapeurs dans les réseaux de
distribution d'ess...
1.1
La présente norme définit les exigences relatives à l'équipment, les critères
de rendement, la procédure à suivre et les méthodes d'essai pour la mise en
place des systèmes de récupération des vapeurs (SRV) dans les réseaux de
distribution de l'essence comprenant les terminaux, les dépôts routiers, les
stations-service et les camions-citernes qui sont regroupés dans la…
Standard for Vapour Control Systems in Gasoline Distribution Networks
1.1 This standard defines equipment requirements, performance criteria,
operating and testing procedures for the implementation of Vapour Control
Systems (VCS) in gasoline distribution networks including terminals, bulk
plants, service stations and cargo tanks, commonly known as Stage I. (See
Figure I for schematic representation.)
1.1.1 This standard does not include vapour control…
Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joint...
Describes conditions under which adhesive joints may be exposed to various climatic or chemical influences for the purpose of assessing the effects of such influences on certain properties. They are not necessarily applicable to the determination of the service life of a bonded assembly. The principle consists in defining the ageing conditions that relate most closely to the application for the…
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: ...
Specifies general safety requirements for electrical equipment intended for professional, industrial process, and educational use, including equipment and computing devices for: -measurement and test; -control; -laboratory use; -accessories intended for use with this equipment. Does not cover: -reliable function, performance or other properties of the equipment; -servicing (repair); -protection…
This National Standard of Canada is equivalent to American National Standards
Institute standard ANSI/BHMA A156.12-1986.
1.1 This Standard establishes the requirements for Interconnected Locks and
includes operational tests, security tests, cycle tests, finish tests and
dimensional criteria.
1.2 Tests described in this Standard are performed under laboratory
conditions. In actual…
This National Standard of Canada is equivalent to American National Standards
Institute standard ANSI/BHMA A156.5-1984.
1.1 This portion of ANSI/BHMA A156.5 establishes requirements for Auxiliary
Bored and Mortise Locks, Rim Locks, and Cylinders and includes security tests,
operational tests, finish tests, and dimensional criteria.
1.2 Tests described in this Standard are performed…
Road vehicles — Calibration fluid for diesel injection equipment
Specifies the requirements for a calibration fluid with which diesel injection equipment may be calibrated and tested in production, in service, and in laboratories. Tabulates characteristics, units of measurement, desired values, and methods of determination. This second edition cancels and replaces the first edition (1978).
Covers requirements for polyolefin laboratory drainage systems
for corrosive applications. Requirements for materials, pipe,
and fittings are included.
