Underground secondary and service-entrance cable for electrical distribution utilities
This Standard is based on Canadian Electricity Association (CEA) WCWG-04 (02/93), Underground
Secondary Cable (used with permission from CEA).
1 Scope
1.1
This Standard specifies requirements for 600 V copper and aluminum conductor secondary and
service-entrance cables intended primarily for operation by electrical utilities. These cables are intended for
underground installation
(a…
Pétrole et produits connexes — Lignes directrices pour la maintenance et l'utilisation des flui...
L'ISO/TS 11365:2011 s'applique à l'utilisation de fluides difficilement inflammables à base d'esters de triaryl phosphate utilisés comme fluides hydrauliques de régulation pour turbines ou autres systèmes de régulation des centrales électriques.
L'ISO/TS 11365:2011 est destinée à
aider l'opérateur de centrale électrique à apprécier les propriétés importantes des…
Règles de sécurité pour les travailleurs en plongée
Scope
1.1 General
1.1.1
This Standard applies to occupational diving operations conducted in connection with all types of work and employment, and describes the requirements for occupational safety.
Note: It is recognized that certain underwater tasks may require specialized standards of practice and/or operational techniques that differ from the requirements of this Standard yet may be…
Protection of first responders from chemical, biological, radiological, and nuclear (CBRN) events
1 Scope
1.1
This Standard specifies requirements for the selection, use, and care of personal protective equipment
(PPE) for first responders to a deliberate chemical, biological, radiological, or nuclear (CBRN) incident,
including releases and contagious outbreak events. It is specifically targeted to fire, police, and medical
first responders/receivers in the front line of the response.
1.2…
Air quality — Determination of time-averaged mass emissions and emission factors — General approach
ISO 11771:2010 specifies a generic method for the determination and the reporting of time-averaged mass emissions from a specific installation or of a family of installations (or common source type), using data collected by measurements, and by establishing: mass emission rates by the simultaneous measurement of concentration and gas flow, using standardized manual or automatic methods, and also…
Vannes de régulation des processus industriels - Partie 7: Grille de définition de vanne de régulati...
La CEI 60534-7:2010 fournit une liste d'exigences généralement nécessaires à la définition de la majorité des vannes de régulation de processus. Il n'a pas été envisagé d'établir une liste exhaustive de toutes les exigences possibles pour tout processus concevable. La liste est disposée de manière à aider le rédacteur de la spécification par une présentation normalisée des données…
Safe installation and operation of hemodialysis and peritoneal dialysis in a home setting
Preface
This is the first edition of CSA Z364.5, Safe installation and operation of hemodialysis and peritoneal dialysis in a home setting.
Introduction
Since the introduction of home hemodialysis and peritoneal dialysis (home dialysis) to Canada more than thirty years ago, these technologies have developed into an increasingly important treatment option for clients with renal disease. The…
STANDARD FOR EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) – DESIGN APPLICATION
This Standard contains requirements for the design, selection and application of exterior cladding utilizing Exterior Insulation and Finish Systems (EIFS) that meet the requirements of CAN/ULC-S716.1, and for the interfaces between EIFS and other building components.
This Standard applies only to EIFS used in combination with a drained air space and liquid applied water resistive barrier (LA-…
Méthode d’essai pour mesurer les pertes de chaleur des chauffe-eau instantanés au gaz
1 Domaine d’application
1.1
Cette norme énonce le mode opératoire pour l’essai de simulation de fonctionnement de 24 heures des
chauffe-eau instantanés au gaz. La norme présente également des méthodes de calcul permettant de
déterminer
a) le débit maximum en L/min (gal US/min) ;
b) l’efficacité de récupération (l’efficacité thermique) ;
c) la consommation d’énergie quotidienne pour le chauffage…
1 Scope
1.1
This Standard applies to deadfront indoor enclosed and outdoor enclosed assemblies of switchgear
devices such as
(a) switches;
(b) interrupting devices;
(c) air circuit breakers;
(d) power circuit breakers; and
(e) control, metering, protective, and regulating equipment with associated interconnections and
supporting structures.
1.2
This Standard covers equipment with a nominal…