Search

This document defines the requirements of capabilities of build and deployment tools to support and automate build, package, and deployment work. This document is intended for use in evaluating and selecting build and deployment tools according to the procedures defined in ISO/IEC 20741. By using these two standards together, objective and rational results can be derived for the evaluation and…

ISO 5459:2011 specifies terminology, rules and methodology for the indication and understanding of datums and datum systems in technical product documentation. It also provides explanations to assist the user in understanding the concepts involved. ISO 5459:2011 defines the specification operator (see ISO 17450-2) used to establish a datum or datum system. The verification operator (see ISO 17450…

This document specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of press brakes which are intended to work cold metal or material partly of cold metal but which can be used in the same way to work other sheet materials (e.g. cardboard, plastic, rubber, leather, etc.) and also referred to as machines. NOTE 1 The design of a…

This document provides information about the measurement and evaluation of the mechanical vibration of wind turbines and their components. The working principle of wind turbines covered by this document is described in annex B. On account of the great influence which the place of installation and type of mechanical drive train can have on the vibration magnitude of all wind turbine components,…

This document defines test methods for sand molds for metal casting produced by means of additive manufacturing technologies. The test methods include the determination of mechanical and physical properties such as, but not limited to, tensile strength, transverse strength, gas permeability, and also others.

This document defines testing coupons and methods for the evaluation of the compression strength of AM lattice designs. The standardized test coupons will accommodate the application of a variety of lattice designs, while standardizing the evaluation method. This document is generally intended to be used in validation or verification activities for an additively manufactured component that…

This document specifies the requirements for wire or textile reinforced hoses and hose assemblies suitable for dispensing hydrogen up to 70 MPa nominal working pressure, in the operating temperature range of −40 °C to 65 °C. This document contains safety requirements for material, design, manufacture and testing of gaseous hydrogen hose and hose assemblies for hydrogen fuelling stations. Hoses…

This document specifies requirements for ten classes, four grades and seven types of wire- or textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 102. Each class has a single maximum working pressure for all sizes. They are suitable for use with: —    oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743‑4 at temperatures ranging from −40 °C…

This document defines a test procedure to simulate and evaluate lumbar and cervical spinal disc prostheses wear under adverse impingement conditions.

Scope of the proposed deliverable. This document defines requirements and message specifications for central ITS station (C-ITS-S) based positioning. This document defines: a) use-cases and requirements for central ITS station (C-ITS-S) based positioning b) message specifications for central ITS station (C-ITS-S) based positioning regarding with the defined use-cases and requirements. - The…