A modular instrumentation system for data handling; CAMAC system
Defines a modular instrumentation system capable of linking transducers and other devices with digital controllers or computers. It consists of mechanical standards and signal standards sufficient to ensure compatibility between units from different sources of design and production. The CAMAC system is primarily designed for nuclear instrumentation but may be
utilized also for other applications…
Fork lift trucks — Hook-on type fork arms — Vocabulary
Defines terms in English, French and Russian relating to fork arms for fork lift trucks, complying with ISO 2328, ISO 2329 and ISO 2330. Some figures illustrate the meaning and location of the parts mentioned.
Information processing - Implementation of the 7- bit coded character set and its 7- bit and 8- bit ...
Defines the implementation of the 7-bit coded character set and of its 7-bit and 8-bit extentions for the interchange of data on 3.81 mm magnetic tape cassette. References: ISO 646; 2022; 3407.
Information processing — Implementation of the 7- bit coded character set and its 7- bit and 8- bit ...
Defines the implementation of the 7-bit coded character set and of its 7-bit and 8-bit extentions for the interchange of data on 3.81 mm magnetic tape cassette. References: ISO 646; 2022; 3407.
Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of pa...
Surfaces are classified in one of the grades E, I, II, III, and IV in accordance with ISO 2426 as defined by the permissible defects indicated in the table. The terms used are defined in ISO 2074. A list of the different species of beech used for this purpose is given in the Annex.
Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of pa...
Classifies the surfaces in one of the grades E, I, II, III, and IV in accordance with ISO 2426 as defined by the permissible defects indicated in the table. The terms used are defined in ISO 2074. A list of the different species of birch used for this purpose is given in the Annex.
Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of pa...
Surfaces are classified in one of the grades E, I, II, III, and IV in accordance with ISO 2426 as defined by the permissible defects indicated in the table. The terms used are defined in ISO 2074. A list of the broadleaved species of Tropical Africa used for this purpose is given in the Annex.
Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of pa...
Classifies the surfaces in one of the grades E, I, II, III, and IV in accordance with ISO 2426 as defined by the permissible defects indicated in the table. The terms used are defined in ISO 2074. A list of the species of poplar used for this purpose is given in the Annex.
Hard coal — Determination of caking power — Roga test
The caking power of a coal is defined by the mechanical strength of the crucible coke obtained by carbonization under standard conditions of an intimate mixture of 1 g of coal and 5 g of standard anthrazite. The crucible coke obtained is then submitted to a drum test in a strictly prescribed manner and the Roga Index is calculated from the results.
Numerical control of machines — Axis and motion nomenclature
This edition cancels and replaces the ISO Recommendation R 841-1968. Defines axis and motion nomenclature, and is intended to simplify programming and to facilitate the interchangeability of recorded data. Applies to all numerically controlled machines.
