Electric Luminaires for Use in Hazardous Locations
1. Scope
1.1 This Standard applies to electric luminaires for indoor, outdoor, and underground use in hazardous locations, intended for permanent installation on branch circuits of not more than 600 V between conductors and involving lamp voltages of not more than 7500 V in accordance with the Rules of the Canadian Electrical Code, Parts I and V.
1.2 This Standard includes requirements for…
Building construction — Jointing products — Sealants — Vocabulary
Defines technical terms for sealants for building purposes and applies to joints filled with hardening, plastic or elastic materials which are not preformed. Does not include all necessary technical terms on jointing products. Material properties are defined in general terms without reference to related quantitative aspects.
Size designation of clothes — Definitions and body measurement procedure
Is intended as a reference document to be consulted in conjunction with the ISO-Standard for the size designation of clothes applicable to the garment under consideration. Defines body dimensions and describes their measurement.
Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 1: Propellers of diameter gre...
Applies to monobloc, built-up and controllable pitch propellers. Defines the various tolerances, describes also methods for measuring pitch, thickness of the section and gives the accuracy classes.
Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 2: Propellers of diameter bet...
Applies to monobloc, built-up and controllable pitch propellers. Defines the various tolerances, describes also methods for measuring pitch, thickness of the section and gives the accuracy classes.
Stationary air compressors — Safety rules and code of practice
Establishes provisions for the safe design, construction, installation and operation of stationary and skid-mounted compressors. Specifies requirements to help minimizing compressor accidents and defines general safety practices for the field. It does not apply to prime movers. The following types of compressor are excluded: with a shaft input less than 2 kW; with an effective discharge pressure…
Road vehicles — Dimensions of two-wheeled mopeds and motorcycles — Terms and definitions
Defines terms relating to the dimensions of mopeds and motorcycles, but does not deal with methods of measurement, nor with the units used in reporting the results, nor with the accuracy required or with the order of magnitude of the dimensions defined. Applies to mopeds and motorcycles as defined in ISO 3833, with the exception of three-wheeled vehicles.
Earth-moving machinery — Seat belts and seat belt anchorages
Establishes the minimum performance requirements for seat belts and the fastening elements of seat belts necessary to restrain an operator or rider within a roll-over protective structure (ROPS) in the event of a machine roll-over as defined in ISO 3471. Applies to earth-moving machinery fitted with ROPS.
Surface treatment and metallic coatings — General classification of terms
This second edition cancels and replaces the first edition (i. e. ISO 2079:1973). Defines a nuber of generic terms for which the definition is considered necessary in order clarify the scope of these processes. In addition to terms used in the three official ISO languages (English, French and Russian), this International Standard includes the equivalent terms in the German language.
Defines the electrical characteristics with which flasher units shall comply when submitted for acceptance. Applies to flashers intended for use on motor vehicles with 12 V or 24 V systems, which may or may not be equipped for a towed vehicle. Can be applied to motorcycles. Not applicable to two-level luminous intensity devices.
