Six preferred sizes are defines by their internal bowl diameter. General design are shown in a figure and the dimensions are tabled. The material shall be general non-brittle plastics. Annex A concern the determination of resistance to extraction of ionic material by water, Annex B describes the flexibility test.
Lubricants, industrial oils and related products (class L) — Classification — Part 0: General
Within this class 18 families of products are defined according to application in order to cover, as far as possible, all the applications for which these products are used. The detailed classification of each family will be given in subsequent parts of ISO 6743 as the need arises. The classification concerns only new products.
Steels — Classification — Part 2: Classification of unalloyed and alloy steels according to main qua...
This part of ISO 4948 defines main quality classes (base steel, unalloyed quality and special steel, and alloyed quality and special steel), main property or application characteristics which are applied with a certain priority.
Electric Luminaires for Use in Hazardous Locations
1. Scope
1.1 This Standard applies to electric luminaires for indoor, outdoor, and underground use in hazardous locations, intended for permanent installation on branch circuits of not more than 600 V between conductors and involving lamp voltages of not more than 7500 V in accordance with the Rules of the Canadian Electrical Code, Parts I and V.
1.2 This Standard includes requirements for…
Building construction — Jointing products — Sealants — Vocabulary
Defines technical terms for sealants for building purposes and applies to joints filled with hardening, plastic or elastic materials which are not preformed. Does not include all necessary technical terms on jointing products. Material properties are defined in general terms without reference to related quantitative aspects.
Size designation of clothes — Definitions and body measurement procedure
Is intended as a reference document to be consulted in conjunction with the ISO-Standard for the size designation of clothes applicable to the garment under consideration. Defines body dimensions and describes their measurement.
Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 1: Propellers of diameter gre...
Applies to monobloc, built-up and controllable pitch propellers. Defines the various tolerances, describes also methods for measuring pitch, thickness of the section and gives the accuracy classes.
Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 2: Propellers of diameter bet...
Applies to monobloc, built-up and controllable pitch propellers. Defines the various tolerances, describes also methods for measuring pitch, thickness of the section and gives the accuracy classes.
Stationary air compressors — Safety rules and code of practice
Establishes provisions for the safe design, construction, installation and operation of stationary and skid-mounted compressors. Specifies requirements to help minimizing compressor accidents and defines general safety practices for the field. It does not apply to prime movers. The following types of compressor are excluded: with a shaft input less than 2 kW; with an effective discharge pressure…
Road vehicles — Dimensions of two-wheeled mopeds and motorcycles — Terms and definitions
Defines terms relating to the dimensions of mopeds and motorcycles, but does not deal with methods of measurement, nor with the units used in reporting the results, nor with the accuracy required or with the order of magnitude of the dimensions defined. Applies to mopeds and motorcycles as defined in ISO 3833, with the exception of three-wheeled vehicles.