Search

1.1 These requirements cover design and construction, performance, and maintenance of local burglar alarm units and systems for use in mercantile premises, mercantile safes and vaults, and bank safes and vaults. 1.2 A local alarm system as covered by these Requirements consists of protective circuits and devices, connected through control apparatus to an enclosed, tamper-protected…

1. Scope 1.1 This Standard applies to the certification of manufacturers of steel building systems as defined in Clause 3.1. 1.2 This Standard prescribes the procedure for certification based on an audit of a manufacturer's plant(s) and facilities by the certification agency. The audit shall cover the following items as they relate to the capability of the manufacturer to produce…

1.1 This standard defines equipment requirements, performance criteria, operating and testing procedures for the implementation of Vapour Control Systems (VCS) in gasoline distribution networks including terminals, bulk plants, service stations and cargo tanks, commonly known as Stage I. (See Figure I for schematic representation.) 1.1.1 This standard does not include vapour control…

Lists and defines technical terms related to glazes, caulks and sealants. Material properties are defined in general terms without reference to related quantitative aspects such as the influence of respective test conditions.

This National Standard of Canada is equivalent to International Standard ISo 8402-1986. 1. Scope and field of application This International Standard defines the basic and fundamental terms relating to quality concepts, as they apply to products and services, for the preparation and use of quality standards and for mutual understanding in international communications.

It is a generic specification for semiconductor devices, discrete devices and integrated circuits, including multichip integrated circuits, but excluding hybrid circuits. It defines general procedures for quality assessment to be used in the IECQ System and gives general rules for measuring methods of electrical characteristics, climatic and mechanical tests, and endurance tests.

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI T1.603-1990. In this standard, the minimal set of bearer services for the primary rate interface for the integrated services digital network (ISDN) that conforms closely to the architectural concepts described by CCITt are defined. The telecommunications environment in the United States…

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI T1.604-1990. In this standard, the minimal set of bearer services for the basic rate interface for the integrated services digital network (ISDN) that conforms closely to the architectural concepts described by CCITt are defined. The telecommunications environment in the United States for…

1. Scope 1.1 This Standard defines the requirements for performance, installation and application, and performance verification of mechanical ventilation systems. This Standard applies to systems that are capable of providing minimum controlled rates of ventilation air to the habitable spaces of those single-family dwellings that (a) fall within the Scope of Part 9 of the National…

This technical report provides details of the test procedure to be employed for measurement of the density of smoke emitted from cables burning under defined conditions. lt describes the means of preparing and assembling test cables having an overall diameter from 10 mm upwards, the method of burning the cables, and gives the requirements for evaluating test results. Has the status of a…