Search

IEC 60335-2-113:2016+A1:2021 deals with the safety of cosmetic and beauty care appliances incorporating lasers or intense light sources for household and similar purposes, where their operation relies on contact with the skin, their rated voltage being not more than 250 V. Battery-operated appliances and other d.c. supplied appliances are within the scope of this standard. Dual supply appliances…

1 Scope 1.1 These requirements cover single pole locking-type separable attachment plugs, cord connectors, panel inlets, and panel outlets, adapters, and accessories, rated up to a maximum of 800 amperes and up to 600 volts ac or dc and not intended for connection or disconnection under load conditions. 1.2 These devices are intended to provide power from feeders or branch circuits, or are…

1 Scope 1.1 These requirements cover flexible metallic hose supplied with fittings on each end that facilitate connection without twisting the hose. They have a corrugated metal core or a nonmetallic inner core which are covered with a stainless steel braid. They have a nominal inside diameter of not more than 4 in (101 mm) intended for use in piping systems carrying compressed gases, such as…

1 Domaine d’application 1.1 Ces exigences couvrent les tuyaux flexibles métalliques fournis avec deux raccords, un à chaque extrémité, qui facilitent le raccordement sans qu’il faille tordre le tuyau. Les tuyaux sont dotés d’un centre en métal ondulé ou d’un centre intérieur non métallique recouvert d’une tresse en acier inoxydable. Leur diamètre intérieur nominal ne dépasse pas 4 po (101 mm…

1 Scope 1.1 This Standard applies to locking-type, pin and sleeve type plugs, receptacles, power inlets, connectors, junction boxes, and live-end covers rated up to 1200 A (for single- and multi-pole) and above 750 V to 35 kV ac, 50/60 Hz or up to 1500 V dc and which shall have one or more pilot contacts for multi-pole configuration and above 750 V to 1000 V ac or dc for single pole…

1 Scope 1.1 The requirements of this Standard apply to Grades A and B acrylic-polymer-coated, siliconepolymer- coated, or vinyl-polymer-coated electrical sleeving that consists of closely woven fabric made from glass (see Table 1 for materials and ratings) and intended for use in equipment designed to be installed and used in accordance with the rules of CSA C22.1, Canadian Electrical Code,…

1 Scope 1.1 This Standard specifies the requirements for insulating tubing that is usually round in cross-section and that consists entirely of extruded compounds whose characteristic constituents are thermosetting, elastomeric, or thermoplastic polymers (see Table 1 for materials and ratings). These requirements also cover heat-shrinkable and crosslinked tubing. 1.2 Tubing is intended for…

IEC 60335-2-115:2021 deals with the safety of electric appliances for skin beauty care of persons and intended for household, commercial and similar purposes, their rated voltage being not more than 250 V. Dual supply appliances, either mains-supplied or battery-operated, are regarded as battery-operated appliances when operated in the battery mode. Examples of appliances that are within the…

1 Scope 1.1 This National Standard of Canada applies to the following organic products: a) Unprocessed plants and plant products, livestock and livestock products, to the extent that the principles of production and specific verification rules for them are described in the standard; b) Processed agricultural crop and livestock products intended for human consumption or use and derived from…

1 Scope This Standard applies to the above-noted products that are intended to be installed or used in accordance with CSA C22.1, Canadian Electrical Code, Part I. This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric portable appliances for household and similar purposes that have a cooking function such as baking, roasting and…