Search

1.1 Scope This standard specifies uniform methods for testing and evaluating the performance of fittings for use with compressed hydrogen gas and hydrogen rich gas mixtures. It does not address special requirements for liquid and slush hydrogen. This standard applies to hydrogen systems applications to meet current market needs. In this standard, the term “fittings” includes fittings,…

1 SCOPE 1.1 This Standard sets forth minimum requirements for the material properties and performance of liners used for secondary containment under and around the area of tanks that are installed aboveground for the storage of flammable liquids and combustible liquids. 1.2 Liners used for secondary containment are intended for permanent installation to contain spills or leakage of product…

Recognizing the impact of ICT on the environment and the increasing attention being placed on sourcing ICT with a low environmental footprint, CANARIE funded a project to initiate a consortium of industrial and commercial enterprises, universities, and government agencies with the common goal of reducing GHG emissions associated with ICT services. Part of this project included the development…

This International Standard describes test equipment and test procedures for determining the colour stability of photographic colour images when subjected to outdoor conditions. It does not specify limits of acceptability or failure criteria. Instead, it provides means for measuring image changes that take place during the aging of pictorial photographic images and indicates the critical image-…

CISPR 16-4-2:2011 is a basic EMC publication. It specifies the method of applying Measurement Instrumentation Uncertainty (MIU) when determining compliance with CISPR disturbance limits. The material is also relevant to any EMC test when interpretation of the results and conclusions reached will be impacted by the uncertainty of the measurement instrumentation used during testing. This second…

B181.0-11 Definitions, general requirements, and methods of testing for thermoplastic nonpressure piping 1 Scope 1.1 This Standard covers thermoplastic nonpressure piping, including (a) drain, waste, and vent pipe and pipe fittings; (b) sewer and storm pipe and pipe fittings; and (c) accessories such as factory-assembled expansion joints, closet flanges, backwater valves, and cleanouts. 1.2…

1 PURPOSE The purpose of this document is to establish the certification requirements, rules of procedure and marking requirements for the certification of compostable products in accordance with the requirements of Standard CAN/BNQ 0017-088 and the technical requirements for compostable products specified in Chapter 5 of this document. This document is for manufacturers seeking to have…

1 PURPOSE This standard specifies the requirements regarding good work-family balance (WFB) practices tailored to the characteristics and realities of organizations and their employees. This standard aims at promoting WFB as an integral part of an organization’s management of human resources. 2 SCOPE This standard applies to all types of organizations (private, public and other) seeking…

1 PURPOSE The purpose of this document is to establish the certification requirements, rules of procedure and marking requirements applying to the certification of products used as dust control agents for nonasphalted roads and other similar surfaces according to the requirements of Standard BNQ 2410-300. This document is for manufacturers seeking to have the conformity of their products…

This National Standard of Canada is equivalent to International Standard ISO/IEC 21827:2008. 1 Scope This International Standard specifies the Systems Security Engineering - Capability Maturity Model® (SSE-CMM®). The SSE-CMM® is a process reference model focused upon the requirements for implementing security in a system or series of related systems that are the information technology…