Search

1 Scope 1.1 This standard provides the requirements for modular built relocatable temporary structures. 1.2 Relocatable structures for temporary use are a form of modular construction, built in an approved offsite facility, designed to be transported to a location, assembled, and utilized. During the life of these structures they may be used in several different locations. 1.3 The buildings…

This document specifies requirements for 14 grades of high-carbon cast-steel shot and 11 grades of high-carbon cast-steel grit, as supplied for blast-cleaning processes. Values are specified for hardness, density, defect/structural requirements and chemical composition. The requirements specified in this document apply to abrasives supplied in the "new" condition only. They do not apply…

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of stationary electric cooking ranges, hobs, ovens and similar appliances for household use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances. This International Standard also includes…

This National Standard of Canada applies to two types of automotive fuel: type 1, 50% to 85% by volume denatured fuel ethanol with gasoline and type 2, 20% to 25% by volume denatured fuel ethanol with gasoline. Both types are strictly for use in flexible-fuel vehicles over a wide range of climatic conditions. Users of this standard are advised to consult the owner’s manual and/or the original…

1.1 These requirements cover primary, secondary, and coaxial types of aboveground pipes intended for transfer and containment of specific flammable and combustible liquids and fuels or fuel components (and vapors thereof) identified in this Standard, at their manufacturing, processing and distribution facilities, commercial (public) or fleet (private) motor vehicle fueling stations or similar…

1.1 Ces exigences portent sur les tuyaux hors sol primaires, secondaires et coaxiaux destinés au transfert et au confinement de liquides inflammables et combustibles et de carburants ou composants de carburants (et des vapeurs générées) indiqués dans la présente norme, dans les installations de fabrication, de traitement et de distribution, les stations-service pour véhicules motorisés de parc…

This document specifies requirements for fused aluminium oxide abrasives, as supplied for blast-cleaning processes. It specifies ranges of particle sizes and values for apparent density, bulk density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides. The requirements specified in this document apply to abrasives supplied in the "new" condition…

This document specifies requirements for 12 grades of low-carbon cast-steel shot abrasive, as supplied for blast-cleaning processes. Values are specified for hardness, density, defect/structural requirements and chemical composition. The requirements specified in this document apply to abrasives supplied in the "new" condition only. They do not apply to abrasives either during or after…

IEC 60335-2-21:2012+A1:2018 deals with the safety of electric storage water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public,…

IEC 60335-2-31:2012+A1:2016+A2:2018 deals with the safety of electric range hoods and other cooking fume extractors intended for installing above, beside, behind or under household cooking ranges, hobs and similar cooking appliances, their rated voltage being not more than 250 V. The cooking appliance can be supplied by electricity or other fuels, such as gas. Appliances not intended for normal…