Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neur...
ISO 80369-6:2016 specifies requirements for small-bore connectors intended to be used for connections in neuraxial applications. Neuraxial applications involve the use of medical devices intended to administer medications to neuraxial sites, wound infiltration anaesthesia delivery, and other regional anaesthesia procedures or to monitor or remove cerebro-spinal fluid for therapeutic or diagnostic…
Gas analysis — Comparison methods for determining and checking the composition of calibration gas mi...
This International Standard provides methods for
_ determining the composition of a calibration gas mixture by comparison with appropriate reference gas
mixtures,
_ calculating the uncertainty of the composition of a calibration gas mixture in relation to the known uncertainty of
the composition of the reference gas mixtures with which it was compared,
_ checking the composition attributed to a…
This document gives the safety requirements and measures for stationary:
— cold presses;
— hot presses;
— bending presses;
— edge/face gluing presses;
— membrane presses;
— embossing presses;
where the pressing force is applied by hydraulic actuators pushing two flat or shaped surfaces against each other, capable of continuous production use, hereinafter referred to as "machines".
It…
Cranes — Proof of competence of steel structures — Part 1: General
ISO 20332-1:2008 sets forth general conditions, requirements, methods and parameter values for performing proof-of-competence determinations of the steel structures of cranes based upon the limit state method. It is intended to be used together with the loads and load combinations of the applicable parts of ISO 8686.
ISO 20332-1:2008 is general and covers cranes of all types. Other International…
Adhesives — Test methods for the selection of adhesives for indoor wood products
ISO 26842:2008 gives guidelines for the selection, by means of durability tests, of adhesives for use in wood products placed in indoor environments.
A series of exposure cycles at various temperatures and humidities is provided to verify that the adhesive selected, or a product bonded with the adhesive, meets the necessary durability requirements.
This International Standard is intended to help…
Document management — 3D use of Product Representation Compact (PRC) format — Part 1: PRC 10001
ISO 14739-1:2014 describes PRC 10001 of a product representation compact (PRC) file format for three dimensional (3D) content data. This format is designed to be included in PDF (ISO 32000) and other similar document formats for the purpose of 3D visualization and exchange. It can be used for creating, viewing, and distributing 3D data in document exchange workflows. It is optimized to store,…
Air cargo — Fire resistant containers — Design, performance and testing requirements
ISO 19281:2016 the minimum design and performance criteria and testing methods of passive fire resistant containers (FRCs) for carriage on aircraft main deck, to be used on either of the following:
a) in those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations;
b) on a voluntary basis, when deemed appropriate…
This International Standard specifies requirements for dried ginger (Zingiber officinale Roscoe) in whole/pieces and ground forms.
Annex A specifies a method for the determination of calcium.
Recommendations for storage and transport conditions are given in Annex B.
Cards and security devices for personal identification — Test methods — Part 6: Contactless proximit...
The ISO/IEC 10373 series defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross‑referenced to one or more base standards, which can be ISO/IEC 7810 or one or more of the supplementary standards that define the information storage technologies employed in identification card applications.
NOTE 1 Criteria for…
ISO 1953:2015 specifies reference methods for the size analysis of coal by manual sieving (wet or dry), using test sieves of aperture sizes between 125 mm and 45 μm. A guide to sampling is given in Annex A.
This International Standard is applicable to all hard coals. It is not applicable to coke or other manufactured fuels.
In the case of pulverized coal which has been ground so that a high…
