Search

This International Standard describes a reference model for the coordination of standards applicable to SCSI-3 I/O systems and a set of common behavioral requirements that are essential for the development of host software and device firmware that can interoperate with any SCSI-3 interconnect or protocol.

This National Standard of Canada is equivalent to International Standard ISO 14024:1999. 1 Scope This International Standard establishes the principles and procedures for developing Type I environmental labelling programmes, including the selection of product categories, product environmental criteria and product function charateristics; and for assessing and demonstrating compliance.…

1. SCOPe 1.1 This Standard sets forth requirements for hose for conducting flammable and combustible liquids handled at temperatures within the range of -40°C to +50°C, primarily into the fuel storage tank of the end use vehicle. 1.2 This Standard also sets forth requirements for hose for conducting flammable and combustible liquids handled at temperatures as low as -54°C to +50°C. 1.3 This…

This International Standard specifies a method for the measurement of haze, an optical property resulting from wide-angle scattering of light, in transparent and substantially colourless plastics. This method is applicable to the measurement of haze values of less than 40 %. NOTE The haze of abraded or matted transparent plastics can be measured, but the value obtained may be erroneously lower…

This International Standard specifies the characteristics, inspections and test methods as well as the quality assurance requirements for aircraft control wire rope assemblies equipped with swaged end fittings. This International Standard is applicable to control wire rope assemblies as defined in ISO 9762.

This International Standard specifies requirements for black oxide coatings on iron and steel (including cast and wrought iron, carbon steel, low alloyed steel and stainless steel). Black oxide coatings can be used to diminish friction between sliding or bearing surfaces or for decorative purposes or to reduce light reflection. Such coatings, with or without supplementary preservative treatment,…

This International Standard specifies a method for the determination of the fat content of animal feeding stuffs. The method is applicable to animal feeding stuffs except oilseeds and oilseed residues. For the purposes of this method, the following two categories of animal feeding stuffs are distinguished. Samples of products in category B need a hydrolysis step prior to extraction. Category B…

This Recommendation | International Standard provides for the unique registration of JPEG and SPIFF Profiles, SPIFF Tags, SPIFF colour Spaces, application specific Markers, SPIFF Compression types and images Registration authorities as defined in the CCITT Rec. T.81 | ISO/IEC 10918-1 and ITU-T Rec. T.84 | ISO/IEC 10918-3. Unless otherwise specified, (P)rofiles, (T)ags, colour (S)paces, (M)arkers…

This International Standard specifies a method for the determination of the moisture and other volatile matter content of animal feeding stuffs. The method is applicable to animal feeding stuffs with the exception of: a) milk products; b) mineral substances; c) mixtures containing a considerable amount of milk products or mineral substances, for example milk replacers; d) animal feeding stuffs…

This International Standard specifies a colorimetric comparison method for the determination of the amount of ammonia and ammonium compounds in phenol-formaldehyde mouldings. NOTE This International Standard does not provide an absolute measure of the amount of ammonia present. The amount of ammonia in a moulded article is of importance when corrosion of metal inserts or contamination of…