Search

This National Standard of Canada is equivalent to International Standard ISO 9241-3:1992. 1 Scope This part of ISO 9241 establishes image quality requirements for the design and evaluation of single- and multi-colour VDTs. The requirements are stated as performance specifications, and the evaluations provide test methods and conformance measurements. It should be noted that, at…

This International Standard specifies the procedures, formats and facilities at the Packet Layer for Data Terminal Equipment (DTE) operating in conformance with ITU-T Recommendation X.25. Both Virtual Call and Permanent Virtual Circuit modes of operation are covered. The Packet Layer protocol specified herein can be used in both Open Systems Interconnection (OSI) and non-OSI environments. When…

This International Standard specifies the procedures, formats and facilities at the Packet Layer for Data Terminal Equipment (DTE) operating in conformance with ITU-T Recommendation X.25. Both Virtual Call and Permanent Virtual Circuit modes of operation are covered. The Packet Layer protocol specified herein can be used in both Open Systems Interconnection (OSI) and non-OSI environments. When…

1. Domaine d'application 1.1 Cette norme décrit les éléments et méthodes essentiels pour la manipulation, le transport et la décontamination biologique sécuritaires des dispositifs médicaux réutilisables contaminés (voir la figure 1). Note : Le traitement de décontamination biologique comprend un nettoyage à fond et, si la sécurité du personnel ou des bénéficiaires l'exige, un…

This Technical Report applies to all forms of silver-gelatin microfilm, whether in roll, aperture card, jacket or microfiche format. It describes the equipment and procedures necessary to identify and monitor deterioration. This information serves to identify the extent and nature of the problem and will ultimately provide a sound basis for any remedial action that may be required.

La présente Norme internationale spécifie une méthode de laboratoire pour la détermination des caractéristiques de distillation des distillats pétroliers légers et moyens ayant un point initial de distillation supérieur à 0 °C et un point final inférieur à environ 400 °C, utilisant un équipement manuel ou automatisé, la méthode manuelle étant la procédure de référence, sauf accord contraire.NOTE…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 12064-1:1995. 1 Scope This part of ISO/IEC ISP 12064 specifies an interchange format suitable for transfer of structured documents between equipment designed for raster processing. The documents supported by this part of ISO/IEC ISP 12064 are based on a paradigm of an electronic engineering drawing or…

1. Domaine d'application 1.1 La présente norme traite des exigences minimales de conception, de construction, d'exploitation et de mise hors service en toute sécurité des installations et de l'équipement connexe de stockage des hydrocarbures dans les formations souterraines. L'équipement visé englobe tout l'équipement des opérations employé dans le sous-sol, la tête…

Preface This is the first edition of CSA Special Publication PLUS 1156, Fall-Arrest Systems - Practical Essentials. There are very few books on fall protection, in spite of considerable interest in the subject. PLUS 1156 is intended to respond to this interest and to assist fall-arrest system users in making the best possible use of the equipment provided by employers for their workers'…

1. Scope 1.1 This Standard covers the design, construction, operation, and maintenance of oil and gas industry pipeline systems that convey (a) liquid hydrocarbons, including crude oil, multiphase fluids, condensate, liquid petroleum products, natural gas liquids, and liquefied petroleum gas; (b) oilfield water; (c) oilfield steam; (d) carbon dioxide used in oilfield enhanced…