Refine Results
Displaying 1429 - 1440 of 12284
Notice of Intent
Technical requirements for in-service evaluation...
This Standard specifies the technical requirements for the licensee to ensure structural integrity of cold-worked Zr-2.5 wt% Nb alloy pressure tubes in operating CANDU reactors. Clause 13 of CSA N285.0/N285.6 Series requires...
Flammability and labelling requirements for tents
This National Standard of Canada applies to flammability and labelling requirements for tents that are subject to the Hazardous Products (Tents) Regulations under the Canada Consumer Product Safety Act . This standard defines...
Notice of Intent
Design, Manufacture and Use of Intermediate Bulk...
This standard sets out the requirements for the design and manufacture of Intermediate Bulk Containers (IBCs) with a capacity equal to or less than 3000 L and their use for the transportation of Class 3, 4, 5, 8 or 9 or...
Notice of Intent
Solvent for Vinyl Pretreatment Coating
This standard applies to a solvent for use with vinyl pretreatment coatings conforming to CAN/CGSB-1.213. The solvent is intended primarily for cleaning equipment used in applying vinyl pretreatment coatings. The testing and...
Notice of Intent
Antiblush Thinner for Cellulose Nitrate Lacquer
This standard applies to a thinner that slows the drying of cellulose nitrate lacquers to prevent blushing under conditions of high relative humidity and temperature. For more detailed information on intended uses, sec par. 8...
Notice of Intent
Thinner for Vinyl Coatings
This standard applies to a mixture of organic liquids for use as a solvent or thinner for coatings formulated with vinyl resins. The thinner is intended for use in reducing vinyl anticorrosive primers and vinyl antifouling...
Notice of Intent
General Purpose Thinner for Lacquers
This standard applies to a mixture of organic liquids in which the active solvent portion for the lacquer is of the ketone and/or ester type. For more detailed information on intended uses see par. 7.2. The testing and...
Notice of Intent
Petroleum spirits thinner
This standard applies to mineral or white spirits petroleum distillate that may be used as a paint and varnish thinner. It is not to be used in special applications where low-flash or high solvency thinners are required. The...
Solar photovoltaic modules and related systems - decommissioning and disposal
This standard will cover safety requirements and best practices for the decommissioning and disposal of PV modules and related materials.
Notice of Intent
Natural Gas Fuelling Stations Installation Code
1.1 This Standard applies to natural gas fuelling stations that may be employed for fleet and public dispensing operations. 1.2 Where the word "shall" is used in this Standard, it indicates a requirement unless approved...
Notice of Intent
High-Solvency Thinner
This standard applies to a high-solvency thinner for use with synthetic resin finishes. The thinner is suitable for the general thinning of synthetic resin base finishes requiring a higher solvent power than provided by...
Notice of Intent
Heating Fuel Oil
1.1 This standard applies to three types of middle distillate fuel oils that are suitable for use in liquid-fuel-burning equipment without preheating (Types 0, 1 and 2), and three types of fuel oils that contain residual fuel...