Search

This National Standard of Canada describes a product specification in compliance to ISO 19131:2007 – Geographic information – Data product specification for the provision of fundamental geographic information to the public...

This Standard sets forth requirements for smoke detectors and accessories, including mechanical guards to be employed in ordinary indoor locations in accordance with the following: a) In Canada only: 1) Standard for the...

1 Scope 1.1 This Standard covers control units, fire alarm systems and control unit accessories for use in accordance with the Standard for the Installation of Fire Alarm Systems, CAN/ULC-S524, in accordance with CSA-C22.1...

F1.1 These requirements cover marine shore power cable sets rated at not less than 20 A and not more than 50 A, 250 V maximum. Each of the marine shore power cable sets is intended to extend the shore power supply from a...

.1 This Standard applies to corrugated electrical nonmetallic tubing (ENT) and mechanically-attached fittings, for use in accordance with C22.1, Canadian Electrical Code, Part I (CEC), and NFPA 70, National Electrical Code...

1.1 This Part applies to fuses for photovoltaic (PV) systems rated up to 1500 Vdc. 1.2 Fuses for photovoltaic (PV) systems are intended to be used for the protection of photovoltaic strings or arrays and their associated...

Reaffirmation 1.1 This International Standard is applicable to: - flow-metering devices that are connected, either directly or by means of flexible connecting assemblies, and disconnected by the operator at terminal units of...

1 SCOPE 1.1 These requirements cover factory-built fireplace systems capable of utilizing solid fuels, as specified by the manufacturer, and intended for provision of supplementary heating in buildings. These fireplace...

1.1.1 This Standard applies to service-entrance, feeder, and branch-circuit busways and associated fittings rated at 600 V 1000 V or less, 6 000 A or less, and intended for use in accordance with the Canadian Electrical Code...

1.1 This Standard applies to electric household dishwashers intended to be used in nonhazardous locations in accordance with the Canadian Electrical Code (CEC), Part I, C22.1, General Requirements %u2013 Canadian Electrical...

This clause of Part 1 is replaced by the following. This International Standard specifies safety requirements for electrically operated commercial refrigerating appliances that have an incorporated compressor or that are...

1.1 This International Standard is applicable to: flow-metering devices that are connected, either directly or by means of flexible connecting assemblies, and disconnected by the operator at terminal units of a medical gas...