Search

This document specifies the Internet of Things system for ecological environment monitoring in terms of the following: – system infrastructure and system entities of the IoT system for ecological environment monitoring for...

1.1 The purpose of this test method is to investigate the ability of mattresses to resist rapid heat release by measuring specific fire test responses when the mattress or mattress set is subjected to a specified flaming...

IEC 62841-1:2014, Clause 1 is applicable, except as follows: Addition: This document applies to hand-held spray guns for non-flammable materials.

This document gives guidelines for assessing the risks related to the potential impacts of climate change. It describes how to understand vulnerability and how to develop and implement a sound risk assessment in the context...

IEC 62841-1:2014, Clause 1 is applicable, except as follows: Addition: This document applies to hand-held strapping tools.

IEC 62841-1:2014, Clause 1 is applicable, except as follows: Addition: This document applies to hand-held jointers for cutting into wood or materials with similar physical characteristics such as, for example, chipboard...

Purpose This test method allows the determination of the particle filtration efficiency of a material. Scope This test method applies to materials of any nature that are used as particle filter.

A revision is needed based on a safety issue and a change in formula

This document describes the method of determining the total moisture content of a test sample of solid biofuels by drying in an oven and is used when the highest precision is not needed, e.g. for routine production control on...

This method describes a procedure for determining the filter plugging tendency of diesel fuels at low temperature usually due to the formation of wax crystals. The method applies to all distillate diesel fuels. Fuels are...

1.1 This method determines the flame spread properties of a textile or product when a specimen is supported at an angle of 45º and a flame is applied to its upper surface for 1 s. 1.2 The testing and evaluation of a product...

Note: This NOI was withdrawn by the responsible SDO on January 4, 2023 . CAN/CGSB-4.2 No. 30.3-94 will become part of CAN/CGSB-4.2 No.27.5. 1.1 This method describes the laundering and dry cleaning procedures for removing non...