Search

1. Scope This part of IEC 61000, which is informative in its nature, provides guidance on principles that can be used as the basis for determining the requirements for the connection of disturbing installations to low voltage...

1.1 The requirements in this standard cover sealed wire connector systems, including insulating caps, covers, resins, tubing, and tapes provided with, or for use with, specific wire connectors. These systems are intended for...

1.1 This Standard sets forth minimum design and construction requirements for non-pressure horizontal cylindrical steel tanks that are used for underground storage of flammable and combustible liquids. In addition to this...

1.1 These requirements cover individually enclosed air switches, rated 4000 A or less at 600 V or less, having all current-carrying parts enclosed, manually operable by means of external handles, and intended to be employed...

1.1 These requirements cover individually enclosed air switches, rated 4000 A or less at 600 V or less, having all current-carrying parts enclosed, manually operable by means of external handles, and intended to be employed...

Note: The standards designation number for this NOI (originally published on April 25, 2023) was updated by the responsible SDO on February 13, 2024. Note: As requested by the responsible SDO, this NOI being reissued as the...

1 Scope 1.1 This Standard sets forth minimum requirements for emergency breakaway fittings, swivel connectors and pipe-connecting fittings of the threadless compression type. Connectors and fittings covered by these...

Note: The ICS Code, scope and project need for this NOI (originally published on January 11, 2022) was updated by the responsible SDO on March 19, 2024. Note: The title and scope for this NOI (originally published on January...

Note: The standard designation, standard sub-type and scope of this Notice of Intent (originally published on April 13, 2023) was updated by the responsible SDO on August 20, 2024. 1.1 Application and material requirements...

1. SCOPE This National Standard of Canada defines equipment requirements, performance criteria, and operating and testing procedures for the implementation of a vapour control system (VCS) in gasoline distribution networks...

1.1 This Standard applies to permanently connected, single or multi-branch circuit, multi-circuit output, solid-state lighting controls rated at 600 V and less, 50 or 60 Hz; single or three phase; with or without overcurrent...

1.1 This Standard applies to portable type gas water heaters (see Clause 3), herein after referred to as water heaters or appliances: a) for use with propane; b) for use with butane; c) for use with liquified petroleum gases...