Search

Please note that the Title and Scope of this NOI was updated on September 12, 2017 as per a request from the responsible SDO. 1.1 These requirements cover the electrical system of unmanned aircraft systems (UASs), as defined...

This clause of Part 1 is applicable, except as follows: Addition: This standard applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in...

1.1 The purpose of this test method is to determine the contribution to fire growth of protective coverings over foamed plastic insulation when tested in a Full-Scale Room Test in accordance with CAN/ULC-9705, Fire Tests -...

This method of test for surface burning characteristics of building materials is applicable to any type of building material that, by its own structural qualities or the manner in which it is applied, is capable of supporting...

Note: The scope and project need for this NOI (originally published January 21, 2020) was updated by the responsible SDO on July 13,2021, August 30, 2021, September 8, 2021 and on February 1, 2022 1 Scope 1.1 These...

1.1 This Standard provides the physical property requirements and test methods to determine the material properties for medium density closed cell spray-applied rigid polyurethane foam, used for thermal insulation or for...

1.1 This test method evaluates the performance of an exterior wall assembly under controlled conditions representing the fire exposure resulting from a post flashover fire in a compartment venting through an opening in the...

1.1 This Standard covers fire endurance tests applicable to walls, partitions, floors, roofs, ceilings, columns, beams, and girders, as well as to some components of these building sub-assemblies. Note: The performance...

1.1 This Standard specifies the requirements for the on-site manufacture and installation of light density, open cell spray applied semi-rigid polyurethane foam to produce a material that meets the physical property...

This Standard covers the construction, operation, installation, inspection and tests applicable to fire signal receiving centres for fire protective signalling services utilizing fire signal receiving centre facilities and...

This test method evaluates the temperature transmission performance of an encapsulation material or assembly of materials installed over a wood substrate when the test specimen is subjected to a standard fire exposure...

This Standard is applicable to the finished surface or covering of a floor extending to a maximum depth of 65 mm. This method is also applicable to the following: Materials which cannot be tested as described in Clause 1.1 of...