Search

This Standard provides a means of determining the non-combustible nature of elementary building materials. It shall be applied to materials used in the construction of buildings. It does not apply to materials with a...

.1 This test method determines the wind uplift resistance of membrane-roofing systems when subjected to dynamic wind load cycles. The test methods are applicable to a) mechanically attached membrane roofing systems; and b)...

1.1 This Standard applies to cellulose fibre loose fill thermal insulation suitable for indoor use in building construction within the temperature range of - 60 to 90 °C. 1.2 Insulation material conforming to this Standard is...

SCOPE These requirements apply to organic lighting emitting diode (OLED) panels intended for portable or permanent installation in accordance with the CSA C22.1, Canadian Electrical Code, Part I, Safety Standard for...

This test method provides a means of measuring the contribution of roof-deck assembly components to the spread of fire on the underside of the roof deck.This method also provides for the assessment of the extent of thermal...

This Standard sets forth the minimum requirements for the design, installation, inspection, testing and maintenance of residential fire warning systems for use within dwelling units and care occupancies not requiring fire...

This test method provides a means of measuring the contribution of roof-deck assembly components to the spread of fire on the underside of the roof deck. This method also provides for the assessment of the extent of thermal...

1.1 This Standard applies to the construction, operation, maintenance and replacement of electric utility systems that are used to generate, transform, transmit, distribute and deliver electrical power or energy to consumer...

Note: The scope for this NOI was updated by the responsible SDO on April 20, 2021 and the title was updated on August 16, 2022. (originally published on April 16, 2020). 1.1 This Standard provides the physical property...

The test methods described in this Standard are applicable to roof covering materials and are intended to measure the relative fire-performance characteristics of roof coverings when exposed to fire originating from sources...

This Standard applies to 25 and 38 mm synthetic percolating type hoses having a minimum service test pressure of 2070 kPa suitable for use in forest fire suppression. These hoses are classified as follows: Class A — woven...

1.1 This Standard covers requirements for permanently installed, portable and transportable toxic and combustible gas and vapour detectors and sensors, including accessories, intended to be employed in indoor locations or...