Search

1 Scope 1.1 These minimum requirements cover accessories intended for direct connection to the low or delivery pressure side of compressed gas regulators. These devices are not intended for direct connection to high storage...

This part of IEC 61000 defines test methods for immunity to ripple at the d.c. input power port of electrical or electronic equipment. This Standard is applicable to low-voltage d.c. power ports of equipment supplied by...

1.1 Scope of MLR International Standard The primary purpose of this International Standard is to specify metadata elements and their attributes for the description of learning resources. This includes the rules governing the...

This International Standard specifies the signalling protocol for the support of the Call Priority Interruption (SS-CPI) and Call Priority Interruption Protection (SS-CPIP) supplementary services at the Q reference point...

This International Standard is applicable to cathode ray tubes and cathode ray tube assemblies (hereinafter referred to as CRTs) which are intended for use as components in apparatus and which have integral protection with...

This Recommendation | Technical Report provides: a) the description of a means to permit a protocol to be identified; b) a record of the structure and allowable ranges of protocol identifier(s) which can be assigned by ITU-T...

1.1 This Standard applies to gas hose connectors (See Clause 3 Definitions), hereinafter referred to as connectors. They are conduits for conveying gas and depend for gas-tightness on the wall structure of the hose material...

201.1 Scope, object and related standards Clause 1 of the general standard1 applies, except as follows: 201.1.1 * Scope Replacement: This part of the 80601 International Standard applies to BASIC SAFETY and ESSENTIAL...

This Standard deals with the safety of powered ride-on and powered WALK-BEHIND MACHINES intended for commercial indoor or outdoor use for the following applications: – sweeping – scrubbing – wet or dry pick-up – polishing –...

Note: The title for this NOI (originally published on April 4, 2023) waws updated by the responsible SDO on April 9, 2024. Note: As requested by the responsible SDO, this NOI being reissued as the standard was in the initial...

This International Standard specifies the signalling protocol for the support of the Wireless terminal call handling additional network features (ANF-WTMI and ANF-WTMO) at the Q reference point between Private Integrated...

These requirements will provide modifications to the ANSI/CAN/UL 12402-9 standard.