Search

Scope 1.1 This Standard describes the test procedures required to perform a 24 h simulated-use test. This Standard also provides the calculations required to determine the first-hour rating, maximum flow rate, recovery...

1.1 Application This Standard applies to the a) design; b) siting; c) construction; d) operation; and e) maintenance of facilities for the liquefaction of natural gas and facilities for the storage, vaporization, transfer...

1.1 This Standard specifies requirements and test procedures to determine the performance of stationary electric signs that are hard wired. Note: Background information on the scope and objective of this Standard is provided...

1.1 This Standard specifies a set of technical requirements and test methods for glazed and unglazed liquid heating solar collectors and covers operating performance and marking requirements. 1.2 This Standard applies to...

1 Scope This International Standard defines communication modes for Near Field Communication Interface and Protocol (NFCIP-1) using inductive coupled devices operating at the centre frequency of 13,56 MHz for interconnection...

1. Scope This part of ISO/IEC 13522 specifies the procedure to be followed by a Registration Authority in preparing, maintaining a nd publishing a register of names (identifiers) allocated to MHEG Registered Objects. NOTE -...

The purpose of CAN-ASC-6.2 is to develop a standard that goes above mandatory minimum technical specifications and produces equity-based technical requirements. There are common areas where people with disabilities may face...

Note: The ICS code for this NOI was updated by the responsible SDO on April 23, 2024. Note: NOI has been updated to reflect that the development has been cancelled and will be replaced by the NOI for CAN/HSO 22004, Mental...

Please note the following NOI has been withdrawn on 2019-02-12 as requested by the responsible SDO. This International Standard defines the principal terms relating to the quantifications of the mass of water and extractable...

Please note the following NOI has been withdrawn on 2019-02-12 as requested by the responsible SDO. This International Standard specifies a method for the determination of length and width of textile fabrics that are in a...

1.1 General This Standard specifies minimum requirements for the inspection of ESC measures throughout the duration of a construction project, as well as requirements and recommendations for monitoring certain water quality...

Replacement: This particular standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of SURGICAL LUMINAIRES AND LUMINAIRES FOR DIAGNOSIS, hereafter referred to as ME EQUIPMENT. This particular standard does not apply...