Search

1.1 General This standard sets out minimum requirements to be used when selecting uniformed security officers and supervisors to protect people, property and information. It provides a “Security Officers Basic (Pre-assignment...

1.1 This Standard describes the test procedures required to perform a 24 h simulated-use test. This Standard also provides the calculations required to determine the first-hour rating, maximum flow rate, recovery efficiency...

1.1 This Standard specifies requirements for the design, construction, installation, inspection, testing, maintenance, and operation of articulating boom cranes. Note: In this Standard, the terms "articulating boom crane" and...

Scope 1.1 This Standard specifies requirements for the design, construction, installation, inspection, testing, maintenance, and operation of articulating boom cranes. Note: In this Standard, the terms "articulating boom...

1.1 This Standard specifies requirements for the selection, use, and care of personal protective equipment (PPE) for first responders to a deliberate chemical, biological, radiological, or nuclear (CBRN) incident,including...

1.1 This Standard describes the requirements, including quality system requirements, for the O&M of an HCF. It sets out specific requirements for a) buildings and architectural systems; b) site elements related to the...

1.1 This Standard applies to newly produced direct gas-fired crop dryers of the recirculating or non-recirculating type, hereinafter referred to as “dryers”, the primary purpose of which is to provide process heating to dry...

1.1 This Standard applies to newly produced vented decorative gas appliances (see Clause 3, Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials and having input ratings...

1.1 Purpose The purpose of this Standard is to establish criteria for the design, manufacture, testing, inspection, installation, maintenance, use, and operation of vehicle-mounted aerial devices installed on a chassis...

This International Standard specifies signalling inter working between QSIG and H.323 in support of basic services within a corporate telecommunication network (CN). QSIG is a signalling protocol that operates at the Q...

This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to hedge trimmers which are designed for use by one operator for trimming hedges and bushes, utilizing one or more linear...

Storage Management Technical Specification, Part 2 Common Architecture, 1.8.0 Rev 4 defines the core architecture and protocols in SMI-S. The components of SMI-S architecture include: • Transport - communicating management...