Search

This part of IEC 61243 is applicable to portable voltage detectors, with or without built-in power sources, to be used on electrical systems for voltages of 1 kV to 800 kV AC, and frequencies of 50 Hz and/or 60 Hz. This...

IEC 62841-1:2014, Clause 1 is applicable, except as follows: Addition: This document applies to transportable planers, thicknessers and combined planers and thicknessers intended for cutting wood and analogous materials with...

This clause of Part 1 is applicable, except as follows: Replacement of the third paragraph: The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. Addition: This...

Note: The designation number for this NOI (originally published on September 7, 2022), was updated by the responsible SDO on October 5, 2022. IEC 62841-1:2014, Clause 1 is applicable, except as follows: Addition: This...

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to hand-held routers intended for cutting slots into or shaping the edge of wood and analogous materials, plastics and non...

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable drills, with manually fed axial movement of the spindle, having a maximum chuck capacity of 13 mm. NOTE 101...

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to hand-held routers intended for cutting slots into or shaping the edge of wood and analogous materials, plastics and non...

This part of lEC 60320 sets the general requirements for appliance couplers for two poles and two poles with earth contact and for the connection of electrical devices for household and similar onto the mains supply. This...

This clause of Part 1 is applicable except as follows: Addition: This part of IEC 62841 applies to transportable bench grinders that can be equipped with one or two accessories as follows: – type 1 grinding wheels in...

1.1.2 These requirements cover: a) fuseholders intended for use with Type C (Edison-base) and Type S Plug Fuses as described in NMX-J-009/248/11-2000-ANCE, CSA C22.2 No. 248.11, UL 248-11, Low-Voltage Fuses - Part 11: Plug...

This document is applicable to conductive clothing , worn during live working (especially bare-hand working) on AC and DC electrical installations, to provide electrical continuity between all parts of the clothing and a...