Search

1.1 Introduction This document describes the overall UPnP IoTManagementAndControl Architecture, which forms the foundation for the UPnP IoTManagementAndControl device [11] and UPnP DataStore service [13] specifications. The...

1.1 This method of test for surface burning characteristics of building materials is applicable to any type of building material that, by its own structural qualities or the manner in which it is applied, is capable of...

1.0 General 1.1 Application Chemical dispensing systems (herein referred to as the “device”) provide a means of mixing potable water with chemicals to provide the user with a chemical solution which is ready for use. The...

B126.0-13 - General requirements and methodsof testing for water cisterns Scope 1.1 General This Standard specifies materials, design, manufacturing practices, methods of testing, and markings for prefabricated water cisterns...

1.1 This Standard covers requirements for external corrosion protection systems on steel non-pressure tanks that are used for the underground storage of flammable liquids and combustible liquids . The requirements are...

Note: The designation number for this NOI (originally published on November 23, 2021) was updated by the responsible SDO on November 22, 2022. Note: As requested by the responsible SDO, this NOI being reissued as the standard...

1.1 This Standard specifies construction and testing requirements for portable power cables normally used in applications where the cables are subject to frequent flexing and where installation is in accordance with CSA M421...

1.1 * Scope This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of MEDICAL ELECTRICAL EQUIPMENT and MEDICAL ELECTRICAL SYSTEMS, hereafter referred to as ME EQUIPMENT and ME SYSTEMS. If a clause...

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric room heaters for household and similar purposes, their rated voltage being not more than 250 V for single-phase...

This part of IEC 60079-29 specifies performance requirements of equipment for the detection and measuring of flammable gases or vapours in ambient air by measuring the spectral absorption by the gases or vapours over extended...

This Standard covers the: a) Construction, operation, installation, inspection and tests applicable to fire signal receiving centres for fire protective signalling services utilizing fire signal receiving centre facilities...