Search

Scope of proposed project: Requirements and recommendations for planning, testing, implementing, and maintaining wayfinding systems in hospitals and other health care facilities. Scope will include signs, but will also...

1.1.1 This Standard applies to low-voltage fuses rated 1000 V or less, AC and/or DC, with interrupting ratings up to 200 kA. These fuses are intended to be used in accordance with the Canadian Electrical Code, Part I (CEC)...

Scope Details test and examination criteria for flammable vapor sensor systems and components for use in gas-burning appliances. This standard applies to a flammable vapor sensor or system capable of operating throughout a...

Scope Details test and examination criteria for line pressure regulators, either individual or in combination with over pressure protection devices intended for application in natural gas piping systems between the service...

This Standard applies to elevators permanently installed in a wind tower to provide vertical transportation of authorized personnel and their tools and equipment only. Such elevators are typically subjected to extreme...

1. Scope 1.1 This Standard covers PVC duct and fittings that are used as a raceway for telecommunication cables. Such ducting may be encased in concrete or directly buried in the ground, depending on type. 1.2 Fittings...

Scope 1.1 General This Standard specifies mapping requirements for the recording and depiction of underground utility infrastructure and related appurtenances at or below grade. This Standard does not apply to utility...

This Standard covers construction, marking and test requirements for flat cable systems for indoor use, in non-hazardous locations, and intended for installation on branch circuits of not more than 600 V between conductors...

This International Standard specifies a method for the determination of the direction of twist in yarns, the amount of twist, in terms of turns per unit length, and the change in length on un twisting, by the direct counting...

This Standard applies to lighting systems equipment, either factory or field-assembled, rated at 600 V or less, designed to be used in non-hazardous locations, which may be smart enabled, designed to control various loads...

1.1 These requirements cover electrical or electronic immobilization systems which are installed on passenger cars and light duty trucks with 12 V electrical systems. 1.2 Both OEM systems and non-OEM systems shall meet the...

This Technical Report provides guidelines for the development and maintenance of the documentation necessary to ensure an effecti ve quality management system, tailored to the specific needs of the organization. The use of...