Search

This International Standard specifies the preferred method of operation and requirements related to operator controls actuated by hand and foot, installed in agricultural tractors and self-propelled agricultural machinery and...

This Standard is a guide to provide a reasonable degree of personal safety for operators and other persons during the normal operation and servicing of agricultural field equipment.

The purpose of this standard is to establish the safety requirements for implements of husbandry used in the local transport and application of anhydrous ammonia for agricultural fertilizer.

The purpose of this standard is to provide a reasonable degree of personal safety for operators and other persons during normal operation and servicing of farmstead equipment. This standard applies to powered farmstead...

This part of ISO 500 specifies the dimensions of the master shield and clearance zones for rear-mounted power take-offs (PTO) of types 1 and 2 on narrow-track (track width 1 150 mm or less) agricultural tractors.

This part of ISO 500 gives general specifications, including speeds, safety requirements, the dimensions for master shield, and clearance zones for rear-mounted power take-offs (PTOs) of types 1, 2, 3, and 4 on agricultural...

1.1 These requirements apply to Factory-Built Unvented Decorative Appliances that are intended to be fixed/non-movable and that use ethyl alcohol (ethanol) and isopropyl alcohol (isopropanol) in liquid or gel form as the fuel...

PURPOSE AND SCOPE This standard specifies the test method to be used to determine the in-place density of soil. This procedure is particularly suitable for soils containing particles with a diameter of 80 mm or more.

PURPOSE AND SCOPE This standard specifies the test method used to determine the in-place density of soil using a plastic rubber elastic membrane. However, this test cannot be used on very soft soil that deforms under slight...

PURPOSE AND SCOPE This standard specifies the test method used to determine the in-place density of soil using a plastic rubber elastic membrane (Washington type apparatus). However, this test cannot be used on soil which...

This standard defines the requirements for new automotive fire apparatus and trailers designed to be used under emergency conditions to transport personnel and equipment and to support the suppression of fires and mitigation...

1.1 This Standard covers lining systems for existing masonry chimneys , which may or may not incorporate a liner of fire-clay tile, and existing factory built chimneys and vents.