Search

This Standard applies to mixers the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of...

This International Standard specifies a uniform representation of human sexes for the interchange of information. It is intended to reduce the time required to record and/or format the representation of sexes and transmit the...

1.1 Scope and object This standard applies, when required by the relevant product standard, to switchgear and controlgear hereinafter referred to as equipmentand intended to be connected to circuits, the rated voltage of...

1.1 These requirements apply to Factory-Built Type A Chimneys, which do not require field fabrication. They are for use with gas and liquid fuel-fired residential appliances and building heating equipment, where the appliance...

1 Scope This part of ISO 11135 specifies requirements for the development, validation and routine control of an ethylene oxide sterilization process for medical devices. NOTE 1 Although the scope of this part of ISO 11135 is...

This International Standard specifies generic cabling for homes. A home may contain one or more buildings or may be within a building that contains more than one home. This standard specifies a generic cabling for three...

1 Scope This part of ISO 12402 specifies the safety requirements for buoyancy aids with a buoyancy of not less than 50 N used in sheltered waters with help and rescue close at hand under such circumstances where more bulky or...

The CAN/CSA-IEC 63092-1 specifies BIPV module requirements while this document specifies BIPV system requirements. Both parts specify building requirements and the applicable electrotechnical requirements (both in general and...

1 This Standard specifies the requirements for low-halogen belowground (Type BG) reinforced thermosetting resin conduit (RTRC) and fittings, for installation and use in accordance with CSA C22.1, Canadian Electrical Code (CEC...

1.1 This Standard specifies the requirements for low-halogen belowground (Type BG) reinforced thermosetting resin conduit (RTRC) and fittings, for installation and use in accordance with CSA C22.1, Canadian Electrical Code...

This National Standard of Canada defines permanence requirements for paper in a broad range of coated and uncoated paper grades. When used in conjunction with other CGSB paper standards specifying each grade’s performance and...

CSA Group will administer a consensus-based process to facilitate the advancement of the Canadian Society for Chemical Engineering (CSChE) PSM standard into a National Standard of Canada (NSC). The scope of the new NSC for...