Search

This Standard specifies requirements for the construction, testing and marking of caplights, including caplights with a point of connection for other equipment, for use in mines susceptible to firedamp (Group I - electrical...

This Standard specifies syntax and semantics of the tools required to provide interoperability in controlling devices in real as well as virtual worlds. In Figure 1, the scope of this part of ISO/IEC 23005 with tools defined...

This part of ISO/IEC 14165 defines mappings for transporting Fibre Channel frames across ATM, SONET and TCP/IP backbone networks. This part of ISO/IEC 14165 consists of three distinct Fibre Channel mappings resulting in the...

The scope of this standard is to define the Media Access Control (MAC) Service provided by all IEEE 802® MACs, and the Internal Sublayer Service (ISS) provided within MAC Bridges, in abstract terms of the following: a) Their...

This International Standard specifies the signalling protocol for the support of the Advice Of Charge supplementary services (SS-AOC) at the Q reference point between Private Integrated services Network eXchanges (PINX)...

This International Standard specifies the signalling protocol for the support of the Advice Of Charge supplementary services (SS-AOC) at the Q reference point between Private Integrated services Network eXchanges (PINX)...

PURPOSE AND SCOPE This standard specifies the test method used to determine the in-place density of soil using a plastic rubber elastic membrane. However, this test cannot be used on very soft soil that deforms under slight...

PURPOSE AND SCOPE This standard specifies the test method used to determine the in-place density of soil using calibrated sand to measure the volume of the test hole. The use of the apparatus described herein is limited to...

This standard specifies the test method used to determine the in-place density of soil using a plastic rubber elastic membrane. However, this test cannot be used on very soft soil that deforms under slight pressure or when...

This standard specifies the test method used to determine the in-place density of soil using cali-brated sand to measure the volume of the test hole. The use of the apparatus described herein is limited to testing soils...

PURPOSE AND SCOPE This standard specifies the test method used to determine the in-place density of soil using a plastic rubber elastic membrane (Washington type apparatus). However, this test cannot be used on soil which...

1.1 This standard applies to flat rigid plastic sheeting intended to provide a safe type glazing material in building construction. It shall be manufactured to prevent or reduce the likelihood of injury to persons by plastic...