Search

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable table saws with – a toothed single blade; or – stacked blades that cut a single groove or slot; or – a moulding...

Replacement: This particular standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ELECTROCARDIOGRAPHS as defined in 201.3.63 intended by themselves or as a part of an ME SYSTEM, for the production of ECG REPORTS...

1.1 This Standard applies to voltage and polarity testers for use in nonhazardous locations, in accordance with the Rules of the Canadian Electrical Code, Part I, on electrical supply circuits and equipment at points where...

This Standard applies to single-phase electric tools of the bench type that are intended for use in nonhazardous locations in accordance with the Canadian Electrical Code, Part I, that are connected to a nominal system...

Scope 1.1 This Standard applies to cord-connected and permanently connected engine heaters and battery warmers for use on nominal system voltages of 600 V and less that are designed to be used in nonhazardous locations such...

1. Scope 1.1 This Standard provides a testing procedure for defining a minimum level of structural adequacy and performance capability for running gear used under trailers, sectional homes, and mobile homes, but excludes...

This clause of Part 1 is applicable, except as follows: 1.1 Addition: This Standard applies to grinders, with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity, polishers and disk...

This International Standard specifies the process requirements for carrying out an energy audit in relation to energy performance. It is applicable to all types of establishments and organizations, and all forms of energy and...

This Standard contains requirements for the installation of Exterior Insulation and Finish Systems (EIFS) that meet the material and system requirements of CAN/ULC-S716.1 and the design requirements of CAN/ULC-S716.3. This...

Scope: CSA C22.2 NO. 60601-2-37:08 (R2023) Addition: This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ULTRASONIC DIAGNOSTIC EQUIPMENT as defined in 201.3.217, hereinafter referred to as ME...

This International Standard specifies requirements for the oxygen compatibility of materials, components and devices for anaesthetic and respiratory applications, which can come into contact with oxygen in normal condition or...

1. Overview This standard prescribes a continuous process for risk management. Clause 1 provides an overview and describes the purpose, scope, and field of application, as well as prescribing the conformance criteria. Clause...