Search

These requirements address the performance of a battery containment enclosure, as defined in this Standard, to mitigate of the heat, fire and internal deflagration hazards generated by thermal runaway of lithium-ion cells...

This Standard covers requirements for permanently installed, portable and transportable toxic and combustible gas and vapour detectors and sensors, including accessories, intended to be employed in indoor locations or outdoor...

1.1 These requirements apply to commercial and/or outdoor wood-fired ovens. Commercial wood-fired ovens are intended for use by commercial establishments for the purpose of cooking or baking food products utilizing solid wood...

Note: The scope was updated by the responsible SDO on September 9, 2020. This standard applies to all individuals, as well as all public or private organizations, engaged in the ethical review and oversight of human research...

1.1 These requirements cover electrically operated single and multiple station smoke alarms intended for open area protection in indoor locations and portable smoke alarms used as "travel" alarms in accordance with: a)...

1 Scope 1.1 This Standard sets forth minimum requirements for emergency breakaway fittings, swivel connectors and pipe-connecting fittings of the threadless compression type. Connectors and fittings covered by these...

1.1 The wire connectors covered by these requirements are intended for use with copper conductor in accordance with installations covered by the National Electrical Code, NFPA 70; the Canadian Electrical Code, Part I, C22.1...

Note: The scope for this NOI (originally published on December 12, 2023) was updated by the responsible SDO on January 23, 2024. 1.1 Management requirements for facilities collecting, processing, storing, and using human...

This clause of Part 1 is applicable except as follows: 1.1 Scope Replacement: This part of IEC 60730 applies to electrically operated door locks for use in, on or in association with equipment, including equipment for heating...

This part of IEC 60974 specifies safety and performance requirements applicable to limited duty arc welding and cutting power sources and auxiliaries designed for use by laymen. Electrically powered equipment is intended to...

This part of IEC 60079 gives requirements for the design, construction, assessment, verification and marking of rooms used to protect internal equipment: – located in a Zone 1 or Zone 2 or Zone 21 or Zone 22 explosive...

1.1 These requirements cover positive displacement liquid meters for use with motor fuels. Motor fuels, as defined by these requirements, include one or more of the fuels described in 1.2. 1.2 Meters for gasoline/ethanol...