Search

These requirements cover the design and construction of "tin-clad" fire doors which have demonstrated in fire tests, fire performance properties sufficient to warrant their use in closure assemblies having a fire-protection...

Scope: This document applies to carbon dioxide (CO2) that is injected in enhanced recovery operations for oil and other hydrocarbons (CO2-EOR) for which quantification of CO2 that is safely stored long-term in association...

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electrical appliances incorporating emitters for exposing the skin to optical radiation (wavelength 100 nm to 1 mm), for...

his clause of Part 1 is replaced by the following. This International Standard deals with the safety of gas, oil and solid-fuel burning appliances having electrical connections, for household and similar purposes, their rated...

1.1 This Standard applies to pin and sleeve type plugs, receptacles, power inlets, and connectors, rated up to 800 amperes and up to 600 volts ac or dc, and which may include up to eight pilot contacts. These devices are...

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric instantaneous water heaters for household and similar purposes and intended for heating water below boiling...

This part of IEC 61000 is concerned with conducted disturbances in the frequency range from 0 kHz to 9 kHz. It gives numerical compatibility levels for industrial and non-public power distribution systems at nominal voltages...

This part of IEC 61000 provides guidance on principles which can be used as the basis for determining the requirements for the connection of unbalanced installations (i.e. three-phase installations causing voltage unbalance)...

This part of IEC 61000 specifies the immunity requirements, test methods, and range of recommended test levels for equipment subjected to impulse magnetic disturbances mainly encountered in: – industrial installations, –...

Proportional Flow Control Devices are commonly found in European hydronic systems. Typically, these product are installed as a part of an integrated system to balance flow into both sides of a double-wall heat exchanger. One...

Note: The standard designation number for this NOI (originally published on February 22, 2022), was updated by the responsible SDO on March 1, 2022. 1. PURPOSE This standardized specification also applies to all work required...

This Standard applies to the classification of degrees of protection provided by enclosures for electrical equipment with a rated voltage not exceeding 72,5 kV. The object of this standard is to give: a) Definitions for...