Search

Scope: 1.1 Products covered 1.1.1 This standard applies to motor control centres to be used in accordance with the U.S. National Electrical Code, ANSI/NFPA 70, the Canadian Electrical Code, Part I, CSA C22.1, and the Mexican...

This standard provides minimum acceptable performance parameters for video surveillance systems. The system stakeholder determines the video surveillance system operational requirements. Refer to Section 8 , System...

1.1 The requirements of this Standard apply to Grades A and B acrylic-polymer-coated, silicone-polymer-coated, or vinyl-polymer-coated electrical sleeving that consists of closely woven fabric made from glass (see Table 1 for...

1.1 This Standard specifies the requirements for insulating tubing that is usually round in cross-section and that consists entirely of extruded compounds whose characteristic constituents are thermosetting, elastomeric, or...

1.1 The requirements of this Standard apply to Grades A and B acrylic-polymer-coated, silicone-polymer-coated, or vinyl-polymer-coated electrical sleeving that consists of closely woven fabric made from glass (see Table 1 for...

This part of IEC 61000 is concerned with the limitation of voltage fluctuations and flicker impressed on the public low-voltage system. It specifies limits of voltage changes which may be produced by an equipment tested under...

This Standard applies to the design, installation, operation, maintenance , and testing of emergency generators and associated equipment for providing an emergency electrical power supply to electrical loads a) in buildings...

1 SCOPE AND FIELD OF APPLICATION 1.1 Scope This is a standard method of tests (SMOTs) for the determination of the airtightness of building envelopes. This Standard contains three test options, two types of assessments and...

This Technical Report defines external metrics for quantitatively measuring external software quality in terms of characteristics and subcharacteristics defined in ISO/IEC 9126-1, and is intended to be used together with ISO...

This Technical Report defines internal metrics for quantitatively measuring external software quality in terms of characteristics and subcharacteristics defined in ISO/IEC 9126-1, and is intended to be used together with ISO...

This method determines the dimensional change and colourfastness of textile fabrics or garments, likely to occur in commercial laundering procedures. The fabric specimen or garment is subjected to an appropriate combination...

Scope IEC 60601-1:2005, Clause 1 applies, except as follows: 201.1.1 * Scope Subclause 1.1 of The general standard is replaced by: This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of PULSE...