Search

This part of this standard specifies a method for assessing the heat release rate and dynamic smoke production rate of specimens exposed in the horizontal orientation to controlled levels of irradiance with an external...

1.1 The Standards for foam liquid concentrates are divided into three categories. Category 1 - Primarily for use on general-purpose hydrocarbon fires Category 2 - Primarily for use on polar solvents, oxygenated fuels, and...

This Standard outlines requirements for Exterior Insulation and Finish Systems (EIFS) installed in accordance with CAN/ULC-S716.2 and designed in accordance with CAN/ULC-S716.3, and used in combination with a drained air...

This Standard contains requirements for the installation of Exterior Insulation and Finish Systems (EIFS) that meet the material and system requirements of CAN/ULC-S716.1 and the design requirements of CAN/ULC-S716.3. This...

This standard specifies the test method to evaluate the reaction of wall and ceiling products to fire when installed at the surface of a small room and exposed directly to a specified ignition source. The test represents a...

1.1 This Standard specifies the requirements and test methods for bead-applied one component polyurethane foam used as an air sealant for building applications. The materials covered under this Standard may be applied on a...

These requirements cover the construction and performance, exclusive of performance during fire tests, of portable dry chemical and dry powder (Class D) fire extinguishers. Dry chemical and dry powder fire extinguishers are...

These requirements cover the construction and performance, exclusive of performance during fire tests, of portable water based agent fire extinguishers. These fire extinguishers are intended to be utilized in accordance with...

These requirements cover the construction and performance, exclusive of performance during fire tests, of portable halocarbon clean agent fire extinguishers. Halocarbon clean agent fire extinguishers are intended to be...

These requirements cover the construction and performance, exclusive of performance during fire tests, of portable carbon-dioxide fire extinguishers. Carbon-dioxide fire extinguishers are intended to be utilized in accordance...

Note: The scope for this NOI (originally published on February 23, 2021) was updated by the responsible SDO on May 14, 2024. 1.1. This standard provides requirements to properly assess the thermal and mechanical performance...

1.1.2 These requirements cover: a) fuseholders intended for use with Type C (Edison-base) and Type S Plug Fuses as described in NMX-J-009/248/11-2000-ANCE, CSA C22.2 No. 248.11, UL 248-11, Low-Voltage Fuses - Part 11: Plug...