Search

This clause of Part 1* is replaced by the following. * For the purposes of this Standard, the term Part 1 means CAN/CSA-C22.2 No. 60335-1 (second edition)/ UL 60335-1 (sixth edition). The machines covered in this Standard are...

1.1 This Standard applies to portable luminaires, intended for use in dry, damp, and wet locations, and intended to be used in accordance with the Rules of CSA C22.1, Canadian Electrical Code, Part I, in non- hazardous...

1.1 This Standard provides requirements and guidance to assist first responders and other agencies in selecting the appropriate level and type of personal protective equipment (PPE) when investigating and dismantling...

Purpose and scope This standard specifies the characteristics and test methods relating to pipe and fittings, manufactured from unplasticized poly(vinyl chloride) [PVC-U], with a nominal diameter smaller than or equal to 150...

1.1 This Standard applies to unvented portable type gas camp heaters of the catalytic and infrared type only up to and including a maximum input of 12,000 Btu/hr (3 517 w) using propane, butane, and liquefied petroleum gas...

1.1 This Standard applies to portable type gas camp stoves (hereinafter referred to as appliance or stove) having input ratings of 15,000 Btu/hr (4.4 kW) or less per burner for use: a) with propane gas, butane gas, and any...

1.1 This Standard specifies a) general design requirements; b) performance requirements; c) test methods; d) requirements for product marking and labelling; and e) requirements for instructions and warnings for MASOR systems...

1.1 This Standard specifies requirements and test procedures to determine the performance of stationary electric signs that are hard wired. Note: Background information on the scope and objective of this Standard is provided...

1.1 This Standard specifies the requirements for single-phase, pad-mounted distribution transformers with separable insulated high-voltage connectors and intended primarily for operation by electric utilities. Note: The...

1.1 This Standard applies to permanently connected, single or multi-branch circuit, multi-circuit output, solid-state lighting controls rated at 600 V and less, 50 or 60 Hz; single or three phase; with or without overcurrent...

1.1 This Standard provides requirements for materials, reduced temperature performance testing, and labelling for roll-over protective structures (ROPS), falling object protective structures (FOPS), operator protective...

1.1 This Standard provides requirements for materials, reduced temperature performance testing, and labelling for roll-over protective structures (ROPS), falling object protective structures (FOPS), operator protective...