Search

1.1.1 Equipment included in scope Replace the existing text with the following: This document specifies safety requirements for HAND-HELD and hand-manipulated current sensors intended for measuring, detecting or injecting...

1.1 This Standard applies to decorative lighting strings, decorative lighting outfits, pre-lit trees, and accessories, intended for seasonal or commercial use connected to circuits of 120 V nominal or less by means of an...

1.1 Scope This Standard specifically addresses the planning, design, operation, and maintenance of intermittent/seasonal discharge lagoon and wetland systems that are most appropriate for use in Northern regions, where...

1.1 This Standard establishes steady-state voltage operating ranges at point of connection for AC power systems in Canada. It serves to provide guidance a) to national committees on utilization and control equipment for...

1 Scope The limits in this International Standard are designed to provide protection for broadcast receivers in the frequency range of 30 MHz to 1 000 MHz when used in the residential environment. Compliance with this...

1. Scope This Standard applies to the erection and use of access scaffold that is (a) supported on a surface; (b) hung from multiple points, but is not capable of moving vertically or horizontally; or (c) mounted on wheels...

1.1 This Standard applies to control panels and assemblies rated at not more than 1500 V, intended to be installed and used in non-hazardous locations in accordance with the rules of the Canadian Electrical Code, Part I...

Scope 1.1 This Standard applies to electric motors and generators for installation and use, in accordance with the Rules of the Canadian Electrical Code, Part I, in non-hazardous locations. Note: The term "machine" throughout...

This Code contains the requirements for fuel-related components and accessories and their assembly on an appliance utilizing gas, downstream of the manual shut-off valve specified in Clause 6.18.2 of CSA B149.1. Clause 13 of...

1.1 This Standard applies to multiple-conductor control and instrumentation cables (including thermocouple cables and thermocouple extension cables) having a voltage rating not exceeding 1000 V and intended for installation...

This part of IEC 61000 relates to the immunity requirements and test methods for electrical and electronic equipment to conducted, common mode disturbances in the range d.c. to 150 kHz. The object of this standard is to...

1.1 This Standard specifies performance requirements and test methods for face protectors marketed, sold, and intended for ringette. 1.2 The intent of this Standard is to reduce the risk of injury to the face and eyes without...