Search

1.1 This Standard provides minimum requirements for primary containment leak detection that uses quantitative assessment of physical characteristics to detect leaks in the primary containment. 1.2 These requirements do not...

Purpose and Scope This standard is intended to establish requirements related to the quality of customer service offered by funeral service providers. When this service standard concerns management activities, such as the...

CAN/CSA-ISO/TR 14969:05 provides guidance to assist in the development, implementation and maintenance of quality management systems that aim to meet the requirements of ISO 13485 for organizations that design and develop...

PURPOSE AND SCOPE This standard specifies the test method to be used to determine the in-place density of soil. This procedure is particularly suitable for soils containing particles with a diameter of 80 mm or more.

PURPOSE AND SCOPE This standard specifies the test method used to determine the in-place density of soil using a plastic rubber elastic membrane. However, this test cannot be used on very soft soil that deforms under slight...

PURPOSE AND SCOPE This standard specifies the test method used to determine the in-place density of soil using a plastic rubber elastic membrane (Washington type apparatus). However, this test cannot be used on soil which...

This Standard is a guide to provide a reasonable degree of personal safety for operators and other persons during the normal operation and servicing of agricultural field equipment.

The purpose of this standard is to establish the safety requirements for implements of husbandry used in the local transport and application of anhydrous ammonia for agricultural fertilizer.

The purpose of this standard is to provide a reasonable degree of personal safety for operators and other persons during normal operation and servicing of farmstead equipment. This standard applies to powered farmstead...

1.1 This Standard covers lining systems for existing masonry chimneys , which may or may not incorporate a liner of fire-clay tile, and existing factory built chimneys and vents.

This part of ISO 500 specifies the dimensions of the master shield and clearance zones for rear-mounted power take-offs (PTO) of types 1 and 2 on narrow-track (track width 1 150 mm or less) agricultural tractors.

This part of ISO 500 gives general specifications, including speeds, safety requirements, the dimensions for master shield, and clearance zones for rear-mounted power take-offs (PTOs) of types 1, 2, 3, and 4 on agricultural...