Search

The scope of this standard is to define the Media Access Control (MAC) Service provided by all IEEE 802® MACs, and the Internal Sublayer Service (ISS) provided within MAC Bridges, in abstract terms of the following: a) Their...

This International Standard defines the requirements for the GS1 DataBar symbology family. It specifies the characteristics of the GS1 DataBar symbology family, data character encodation, symbol formats, dimensions, print...

Note: The designation number for this NOI (originally published on November 23, 2021) was updated by the responsible SDO on November 22, 2022. Note: As requested by the responsible SDO, this NOI being reissued as the standard...

This part of IEC 60947 specifies requirements for PCB terminal blocks primarily intended for industrial or similar use. Mounting and fixing on the printed circuit board is made by soldering, press-in or equivalent methods to...

This Standard specifies syntax and semantics of the tools required to provide interoperability in controlling devices in real as well as virtual worlds. In Figure 1, the scope of this part of ISO/IEC 23005 with tools defined...

1.1 This standard applies to three types of middle distillate fuel oils that are suitable for use in liquid-fuel-burning equipment without preheating (Types 0, 1 and 2), and three types of fuel oils that contain residual fuel...

This International Standard specifies a dynamic test method and the acceptance conditions for roll-over protective structures (cab or frame) of wheeled tractors for agriculture and forestry. It is applicable to tractors...

This part of ISO/IEC 15426 defines test methods and minimum accuracy criteria for verifiers using the methodology of ISO/IEC 15416 for linear bar code symbols, and specifies reference calibration standards against which these...

Drawing upon existing best practices, climate change modeling, and local knowledge this standard will provide requirements and recommendations relevant to preventing erosion and its impact on infrastructure and communities in...

This standard includes planning for the supply of medical grade PPE (e.g., masks, respirators, gloves, gowns) and specifying Canadian requirements including considerations with respect to materials science. This includes...

This International Standard establishes a consistent and reproducible means of evaluating the load-carrying characteristics of tip-over protective structures (TOPS) under static loading, and prescribes performance...