Search

1 Scope This part of IEC 61869 is a product standard and covers only additional requirements for low- power passive voltage transformers (passive LPVT). The product standard for low-power passive voltage transformers is...

1.1 This standard applies to three types of middle distillate fuel oils that are suitable for use in liquid-fuel-burning equipment without preheating (Types 0, 1 and 2), and three types of fuel oils that contain residual fuel...

This Standard specifies requirements for photovoltaic (PV) rapid shutdown systems (PVRSS) and PV rapid shutdown equipment (PVRSE) intended to be used in ordinary locations in accordance with CSA C22.1, Canadian Electrical...

This document specifies the communication mode selection and switching mechanism, designed not to disturb any ongoing communication at 13,56 MHz, for devices implementing ISO/IEC 18092, the ISO/IEC 14443 or ISO/IEC 15693...

The purpose of this Standard is to provide criteria and considerations for the safe selection and use of active fall-protection equipment and systems. The selection and use of fall-protection systems as part of a fall...

1. Scope This International Standard defines the requirements for the symbology known as QR Code 2005. It specifies the QR Code 2005 symbology characteristics, data character encoding methods, symbol formats, dimensional...

This standard specifies interchangeable glow-starters used with pre-heat type fluorescent lamps, hereafter called "starters". Section 1 specifies the general and safety requirements with which starters shall comply. Section 2...

1 Scope This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to hand-held sanders and polishers with the exception of disc-type tools covered by IEC 62841-2-3. Tools covered by this...

This part of IEC 61000 covers testing and measuring techniques for electric and electronic equipment (apparatus and systems) in its electromagnetic environment. The object of this part is to give applicability assistance to...

This Standard applies to polyvinyl chloride (PVC) insulating tape for use at a maximum temperature of 60, 80, 90 or 105°C, for insulating joints and splices in wires and cables having voltage ratings up to 1000 V, in...

Details test and examination criteria for line pressure regulators, either individual or in combination with over pressure protection devices intended for application in natural gas piping systems between the service...

1.1 This International Standard covers those aspects to be considered when electrical/electronic/programmable electronic (E/E/PE) systems are used to carry out safety functions. A major objective of this standard is to...