Search

1.1 These requirements cover hardware for the support of conduit, tubing, and cable, such as HANGERS, STAPLES, STRAPS, and similar devices for installation in accordance with the National Electrical Code, NFPA 70, and the...

1.1 The following requirements provide the minimum criteria for the material properties and performance of nonmetallic containers of the non-pressure type, intended to bulk store and dispense combustible (such as new...

1.1 The requirements in this standard cover sealed wire connector systems, including insulating caps, covers, resins, tubing, and tapes provided with, or for use with, specific wire connectors. These systems are intended for...

1.1 This standard applies to pin and sleeve type plugs, receptacles, power inlets, and connectors, rated up to 800 amperes and up to 600 volts ac or dc, and which may include up to eight pilot contacts. These devices are...

This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of electric HEAT PUMPS, including SANITARY HOT WATER HEAT PUMPS, AIR CONDITIONERS, and DEHUMIDIFIERS incorporating motor...

Note: The scope of this Notice of Intent (originally published on November 21, 2023) was updated by the responsible SDO on July 30, 2024. 1.1 Inclusions This Code applies to the portions of a motor vehicle maintenance...

This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of electric HEAT PUMPS, including SANITARY HOT WATER HEAT PUMPS, AIR CONDITIONERS, and DEHUMIDIFIERS incorporating motor...

1 SCOPE 1.1 This Standard covers requirements for external corrosion protection systems on steel non-pressure tanks that are used for the underground storage of flammable liquids and combustible liquids . The requirements are...

This Standard covers requirements for control units, fire alarm systems and control unit accessories for use in accordance with the Standard for the Installation of Fire Alarm Systems, CAN/ULC-S524, in accordance with Rule 32...

1. Scope This part of IEC 61000, which is informative in its nature, provides guidance on principles that can be used as the basis for determining the requirements for the connection of disturbing installations to low voltage...

The Open Group Technical Standard, 2006, Extended API Set Part 1 The Open Group Technical Standard, 2006, Extended API Set Part 2 The Open Group Technical Standard, 2006, Extended API Set Part 3 The Open Group Technical...