Search

Note: This notice of intent was withdrawn by the responsible SDO on June 25, 2024. Note: The project need for this NOI (originally published on September 29, 2015) was updated by the responsible SDO on January 6, 2021. This...

1.1 This Standard provides the physical property requirements and test methods to determine the material properties for medium density closed cell spray-applied rigid polyurethane foam, used for thermal insulation or for...

This clause of Part 1 is applicable, except as follows: Addition: This Standard applies to chain saws for cutting wood and designed for use by one person. This Standard does not cover chain saws designed for use in...

This part of IEC 61000 for EMC immunity requirements applies to electrical and electronic apparatus intended for use in residential, commercial and light-industrial environments. Immunity requirements in the frequency range 0...

This Standard is applicable to the finished surface or covering of a floor extending to a maximum depth of 65 mm. This method is also applicable to the following: Materials which cannot be tested as described in Clause 1.1 of...

This clause of Part 1 is applicable, except as follows: Addition: This standard applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in...

This International Standard specifies a distributed medium access control (MAC) sublayer and a physical layer (PHY) for wireless networks.

This International Standard is applicable to the development and use of conformance test method specifications for POSIX standards and may be applicable to other application programming interface specifications. This...

1.1 This test method is for use in determining values of flame propagation distance and smoke optical density for electrical and optical-fibre cables and non-metallic raceways that are to be installed in ducts, plenums, and...

1.1 These requirements cover the design and construction of single swing Wood Core Flush Doors, which have shown by fire tests to possess sufficient properties to warrant a 20 min fire-protection rating when tested in...

The test methods described in this Standard are applicable to roof covering materials and are intended to measure the relative fire-performance characteristics of roof coverings when exposed to fire originating from sources...

1 SCOPE 1.1 This Standard provides minimum requirements for primary containment leak detection that uses quantitative assessment of physical characteristics to detect leaks in the primary containment. 1.2 These requirements...