Refine Results
Displaying 2773 - 2784 of 12157
Notice of Intent
Safety requirements for electrical equipment ...
This clause of part 1 is applicable except as follows: 1. Scope Replacement: This part 2 applies to equipment intended for in vitro diagnostic (IVD) medical purposes, including self-test IVD medical purposes. IVD medical...
Notice of Intent
Safety requirements for electrical equipment ...
Scope and object This clause of Part 1 is applicable except as follows: Scope Replacement: Replace the whole text by the following new paragraph: This part of IEC 61010 is applicable to electrically operated laboratory...
Notice of Intent
Standard for Smoke Alarms
These requirements cover electrically operated single and multiple station smoke alarms intended for open area protection in indoor locations, in accordance: a) Installation of Smoke Alarms, CAN/ULC-S553; b) National Building...
Notice of Intent
Quality Management Systems - Fundamentals and...
This International Standard describes fundamentals of quality management systems, which form the subject of the ISO 9000 family, and defines related terms. This International Standard is applicable to the following: a)...
Notice of Intent
Maintenance requirements and intervals for elevators...
1.1 This Standard specifies maintenance requirements and service intervals for elevators, dumbwaiters, escalators, and moving walks for use when the original manufacturer's recommendations are unavailable or there are...
Notice of Intent
Thermoplastic non-pressure piping compendium
.1 This Standard covers thermoplastic nonpressure piping, including (a) drain, waste, and vent pipe and pipe fittings; (b) sewer and storm pipe and pipe fittings; and (c) accessories such as factory-assembled expansion joints...
Notice of Intent
Motor Operated Food Processing Appliances (Household...
.1 This Standard applies to motor operated food processing appliances intended for use on nominal system voltages of 600 V and less, except that where appliances are driven by universal type motors or electromagnetic...
Notice of Intent
Cutout, Junction and Pullout Boxes
1.1 This Standard applies to the following products intended for use in accordance with the Rules of the Canadian Electrical Code, Part I: (a) metal and nonmetallic cutout boxes; (b) metal and nonmetallic junction boxes (of...
Notice of Intent
Textile Test Methods - Quantitative Analysis ...
1.1 This standard describes a physical method of quantitative analysis. The method may be used to analyze mixtures of fibers that differ in density by at least 0.15 g/ml. The method may also be used when chemical methods of...
Notice of Intent
Textile Test Methods - Colourfastness to dry ...
1.1 This method assesses the fastness of the colour of textile fabrics and yarns to dry cleaning solvent. The results of this test have been found to correlate satisfactorily with those obtained in commercial dry cleaning...
Notice of Intent
Textile Test Methods - Dimensional Change in ...
1.1 This method describes a procedure for determining the shrinkage that may occur in a fabric as a result of dry cleaning. 1.2 The procedures for determining the dimensional changes as a result of wet cleaning are covered in...
Notice of Intent
Textile Test Methods - Breaking Strength of Seams...
1.1 This method determines the breaking strength of sewn seams in woven textile fabrics. 1.2 The seams may be obtained either from a previously sewn article or may be prepared in the laboratory according to agreed...