Search

This Standard contains requirements for 25 and 38 mm forged quick connect couplings and adapters of the external lug design for use in the forestry service. NOTE 1: Quick connect coupling and adapter sizes stated refer to the...

PURPOSE AND SCOPE This document specifies the method for the Standard Penetration Test (SPT) used to determine the penetration index N in a vertical drilling and obtain a disturbed soil sample. The Standard Penetration Test...

1.1 This test method evaluates the performance of an exterior wall assembly under controlled conditions representing the fire exposure resulting from a post flashover fire in a compartment venting through an opening in the...

1.1 This Standard specifies methods for measuring the volume, energy consumption, and total display area (TDA) of electrically operated commercial refrigeration equipment. 1.2 This Standard applies to commercial refrigerator...

1.1 This Standard describes the requirements for the application and installation of ancillary devices which interact with a fire alarm system. This Standard shall be applied in conjunction with CAN/ULC-S524, Standard for...

This Standard applies to 25 and 38 mm synthetic percolating type hoses having a minimum service test pressure of 2070 kPa suitable for use in forest fire suppression. These hoses are classified as follows: Class A — woven...

The requirements of this standard cover the following items regardless of the propulsion system used: a) Passenger cars; b) SUVs; c) Light-duty trucks and vans (under 6,850 lb); d) Medium-duty vehicles (6,851 – 10,000 lb); e)...

The test methods described in this Standard are applicable to roof covering materials and are intended to measure the relative fire-performance characteristics of roof coverings when exposed to fire originating from sources...

1.1 This Standard specifies criteria and methods to establish and verify the energy performance ratings for fuel-burning appliances and equipment. This Standard includes procedures for sampling, analysis of test results, and...

1.1 This Standard contains requirements for the design, selection and application of exterior cladding utilizing Exterior Insulation and Finish Systems (EIFS) that meet the requirements of CAN/ULC-S716.1, and for the...