Search

1.1 The requirements in this standard cover sealed wire connector systems, including insulating caps, covers, resins, tubing, and tapes provided with, or for use with, specific wire connectors. These systems are intended for...

1.1 Scope 1.1.1 Equipment included in scope This part of IEC 61010 specifies general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used. a)...

.1 This part of ISO 9170 applies to: a) terminal units intended for use in medical gas pipeline systems in accordance with ISO 7396-1, for use with the following medical gases: - oxygen; - nitrous oxide; - medical air; -...

ISO/IEC 18013 establishes guidelines for the design format and data content of an ISO-compliant driving licence (IDL) with regard to human-readable features (ISO/IEC 18013-1), ISO machine-readable technologies (ISO/IEC 18013...

1.1 Organisation and Content — This standard consists of four parts and six appendices. Part I is an introductory part that specifies requirements of general application with respect to the handling, offering for transport...

This clause of Part 1 is applicable except as follows: 1.1 Scope Replacement: This part of IEC 60730 applies to electrically operated water valves for use in, on or in association with equipment for household and similar use...

Z240.0.2-14 - General requirements for recreational vehicles Scope 1.1 This Standard specifies dimensional and safety requirements for recreational vehicles. Its purpose is to specify minimum criteria for providing a degree...

1.1 This Standard applies to newly produced outdoor cooking gas appliances (see Clause 3) constructed entirely of new, unused parts and materials. Outdoor cooking gas appliances submitted for examination under this Standard...

1.1 This standard applies to two grades of kerosene-type aviation turbine fuel (grades JET A and JET A-1), consisting of conventional hydrocarbons, synthetic hydrocarbons, naturally occurring non-hydrocarbons and additives as...

NOTE: Due to an oversight by the responsible SDO, the Notice of Intent (NOI) for CSA/ANSI NGV 6.1 was not registered as required. The NSC has since been published in March 2018. In order to respect the approved parameters of...

.1 This Standard applies to newly produced manually operated metallic gas shut-off valves, hereinafter referred to as valves, constructed entirely of new, unused parts and materials which: a) are for indoor/outdoor...

Note: The standard designation, standard sub-type and scope of this Notice of Intent (originally published on April 13, 2023) was updated by the responsible SDO on August 20, 2024. 1.1 Application and material requirements...