Search

201.1 Scope and object IEC 60601-1:2005, Clause 1 applies, except as follows: 201.1.1 * Scope Replacement: This International Standard specifies particular requirements for the BASIC SAFETY and ESSENTIAL PERFORMANCE of a...

This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HIGH INTENSITY THERAPEUTIC ULTRASOUND EQUIPMENT as defined in 201.3.218, hereafter referred to as ME EQUIPMENT. This International Standard...

This standard is applicable to ac contactors applied at voltages in the range of 1 501V to 15kV, and metal-enclosed contactor-based controllers, control centers, and other control assemblies and associated equipment applied...

1.1 This Standard covers personal hygiene devices for water closets and specifies requirements for materials, construction, performance, testing, and markings. 1.2 Products covered by this Standard include bidet sprayers and...

1.1 Purpose This document provides a set of critical system of systems (SoS) considerations to be addressed at key points in the life cycle of the system of interest (SoI). This document refers to considerations that apply to...

1.1 This Standard covers rigid polyvinylchloride (PVC) pipe and fittings intended for use in pressure applications such as water mains, water service piping, and process piping. The fittings covered by this Standard include...

Note: The ICS code, scope and project need for this NOI (originally published June 8, 2021) was updated by the responsible SDO on February 15, 2022. 1 SCOPE 1.1 This Standard covers construction and performance requirements...

1.1 Scope of this Standard This Standard specifies requirements for thermoplastic pressure piping. It includes reference publications, definitions, abbreviations, general requirements for materials and manufactured pipe and...

1.1 General This Standard covers rigid polyvinylchloride (PVC) injection-moulded fittings that have gasketed joints and are intended for use in pressure applications such as water mains, water service piping, process piping...

1.1 General This Standard covers socket- and saddle-type polyethylene (PE) electrofusion fittings that are used to join PE pipe where the heat source is an integral part of the fitting. Note: Fittings covered by this Standard...

This International Standard specifies the signalling protocol for the support of Recall supplementary service (SS-RE) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together...

This International Standard specifies the signalling protocol for the support of the Short Message Service (SMS) at the Q reference point between Private Integrated services Network exchanges (PINXs) connected together within...