Search

Purpose and scope This standard specifies requirements for the design, performance, and safety of equipment in an ambulance (patient compartment) used for the transport and care of patients. The standard also specifies...

This standard specifies the test method to evaluate the reaction of wall and ceiling products to fire when installed at the surface of a small room and exposed directly to a specified ignition source. The test represents a...

These requirements cover hose in nominal internal diameter sizes of 8 mm up to and including 32 mm for use on portable and wheeled fire extinguishers, hand hose line fixed extinguishing systems, and also as booster hose on...

PURPOSE This standard specifies the characteristics and test methods relating to solid-wall high-density polyethylene (HDPE) pipe having a hydrostatic design basis greater than or equal to 11 MPa. NOTE — The designer may...

PURPOSE AND SCOPE This standard specifies the characteristics and test methods relating to unplasticized poly(vinyl chloride) [PVC-U] pipe having a nominal diameter ranging from 100 mm to 1500 mm. This standard applies to...

Purpose and scope This standard specifies the characteristics and test methods relating to perforated pipes and fittings, manufactured from unplasticized poly(vinyl chloride) [PVC-U], with a nominal diameter smaller than or...

Purpose and scope This standard specifies the characteristics and test methods relating to perforated pipes and fittings, manufactured from unplasticized poly(vinyl chloride) [PVC-U], with a nominal diameter smaller than or...

1.1 General This Standard specifies requirements, in accordance with the National Building Code of Canada, for the design and strength evaluation of a) structures of reinforced and prestressed concrete; and b) plain concrete...

1.1 This Standard covers requirements for external corrosion protection systems on steel non-pressure tanks that are used for the underground storage of flammable liquids and combustible liquids. The requirements are as...

1 Scope 1.1 This document specifies the physical property requirements and test methods used to verify compliance of those material properties for low pressure spray applied rigid two-component polyurethane foam for use as...

Proportional Flow Control Devices are commonly found in European hydronic systems. Typically, these product are installed as a part of an integrated system to balance flow into both sides of a double-wall heat exchanger. One...

This standard is applicable to ac contactors applied at voltages in the range of 1 501V to 15kV, and metal-enclosed contactor-based controllers, control centers, and other control assemblies and associated equipment applied...