Search

1.1 This Standard applies to Class A, single- and three-phase, ground-fault circuit-interrupters intended for protection of personnel, for use only in grounded neutral systems in accordance with the National Electrical Code...

1.1 General This Standard provides requirements for the design and evaluation of building components of fibre-reinforced polymers (FRP) in buildings and of building components reinforced with FRP materials. It is based on...

This standard is applicable to ac contactors applied at voltages in the range of 1 501V to 15kV, and metal-enclosed contactor-based controllers, control centers, and other control assemblies and associated equipment applied...

This document specifies general requirements for production, labelling, test methods and performance characteristics of biological indicators, including inoculated carriers and suspensions, and their components, to be used in...

This Standard establishes requirements for combination door closers-holders equipped with integral electromechanical or electromagnetic holders and which may be provided with integral smoke detectors intended for use with...

These Requirements apply to Factory-Built Chimney assemblies which do not require field fabrication. They are for use with gas, liquid and solid fuel-fired residential appliances and building heating equipment, where the flue...

This clause of IEC Publication 335-1 is applicable except as follows: 1.1 Replacement: This standard applies to electric fans and their associated regulators intended for use on single-phase a.c. and d.c. circuits not e...

Scope This clause of IEC Publication 335-1 is applicable except as follows: 1.1 Replacement: This standard applies to electric fans and their associated regulators intended for use on single-phase a.c. and d.c. circuits not e...

1.1 This Standard applies to 60 to 250 °C single- or multiple-conductor, jacketed or unjacketed, integral or non-integral cables and single or multiple coaxial cables for telephone and other communication circuits such as...

1.1 This Standard specifies the requirements for insulating tubing that is usually round in cross-section and that consists entirely of extruded compounds whose characteristic constituents are thermosetting, elastomeric, or...