Search

1.1 This method determines the flame spread properties of a textile or product when a specimen is supported at an angle of 45º and a flame is applied to its upper surface for 1 s. 1.2 The testing and evaluation of a product...

Note: This NOI was withdrawn by the responsible SDO on January 4, 2023 . CAN/CGSB-4.2 No. 30.3-94 will become part of CAN/CGSB-4.2 No.27.5. 1.1 This method describes the laundering and dry cleaning procedures for removing non...

This document, which is a Technical Report, provides recommendations for the selection and testing where necessary of conductor stringing equipment and accessory items used for the installation of bare and insulated overhead...

1.1 This method is used to determine the lead content of gasolines, including those containing ethanol. Lead in the range of 1 to 1100 mg/L can be measured. 1.2 The testing and evaluation of a product against this method may...

The ISO 11138 series provides manufacturers and others with the requirements for production, labeling, test methods and performance requirements of biological indicators used to develop, validate and monitor sterilization...

This document applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of VENTILATORY SUPPORT EQUIPMENT, as defined in 201.3.205, for VENTILATORY IMPAIRMENT, as defined in 201.3.202, hereafter also referred to as ME EQUIPMENT...

This Technical Report provides guidance for organizations on managing risk effectively by implementing ISO 31000. It provides: — a structured approach for organizations to transition their risk management arrangements in...

This document gives the safety requirements and measures for stationary calibrating and sanding machines, with an integrated feed and one or more sanding belt units positioned above and/or below the work piece level, with...

This document gives the safety requirements and measures for stationary and displaceable hand-fed single spindle vertical moulding machines, hereinafter referred to as "machines", designed to cut wood and materials with...

Clause 1 of IEC 61058-1:2016 is applicable except as follows. Addition: This part of IEC 61058 is a subset based on IEC 61058-1. The clauses outlined below are intended to address the specific requirements for switches...

ISO 35101:2017 describes the working environment that can be expected when operating oil and gas facilities in Arctic environments/climate. ISO 35101:2017 provides principles and generic guidelines for the design and...

ISO 35103:2017 gives requirements, specifications and guidelines to ensure that environmental monitoring in the offshore Arctic region is fit for purpose. The Arctic region includes the territory lying to the North of the...