Search

Refine Results
Type
Program
Status
Country
Province
City
Accreditation Sub-Programs
Program Specialty Area
GLP Area of Expertise
Field of Testing
Fields of Compliance
Period range

From

To

Displaying 7477 - 7488 of 11300
Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor
Scope: This clause of Part 1 is replaced by the following. This International Standard specifies safety requirements for electrically operated commercial refrigerating appliances that have an incorporated compressor or that...
Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction
1 Scope and object [Add the following] The requirements of CAN/CSA-C22.2 No. 61730-1 and CAN/CSA-C22.2 No. 61730-2 address flat-plate PV modules that are used in systems where the maximum system voltage is equal to or less...
Notice of Intent

Technical requirements for in-service evaluation...

This Standard specifies the technical requirements for the licensee to ensure structural integrity of cold-worked Zr-2.5 wt% Nb alloy pressure tubes in operating CANDU reactors. Clause 13 of CSA N285.0/N285.6 Series requires...
Notice of Intent

Heating Fuel Oil

1.1 This standard applies to three types of middle distillate fuel oils that are suitable for use in liquid-fuel-burning equipment without preheating (Types 0, 1 and 2), and three types of fuel oils that contain residual fuel...
Automotive Diesel Fuel Containing Low Levels of Biodiesel (B1–B5)
1.1 This standard applies to two types of automotive diesel fuel containing low levels of biodiesel: Type A-ULS, Bx and Type B-ULS, Bx. 1.1.1 Bx represents biodiesel fuel containing x percent by volume of biodiesel component...
Diesel Fuel Containing Biodiesel (B6–B20)
1.1 This standard applies to one class of Type B ultra low sulphur diesel fuel (<15 ppm S) containing from 6% to 20% by volume of biodiesel. 1.1.1 Users of fuel meeting this standard are advised to refer to the owner’s manual...
Notice of Intent

Safety Requirements for Electrical Equipment ...

Scope and object This clause of part 1 is applicable, except as follows: Scope Replacement: This International Standard applies to the HAND-HELD and hand-manipulated CURRENT SENSORS described below. These CURRENT SENSORS are...
Notice of Intent

Anti-siphon fill valves for water closet tanks

1.1 This Standard covers anti-siphon fill valves intended to be installed in water closet tanks. Note: In this Standard, anti-siphon fill valves are also referred to as "devices". 1.2 In this Standard, "shall" is used to...
Notice of Intent

Standard for the Installation, Inspection and...

This Standard prescribes requirements for: A The installation of intrusion alarm systems. B The classification of extent of protection; and C The testing and inspection of intrusion alarm systems. Intrusion alarm systems are...