Refine Results
Displaying 2113 - 2124 of 11151
Notice of Intent
Textile test methods — Fabric thickness
This method measures the thickness of textile fabrics as determined between parallel plane surfaces under an arbitrary pressure. Since all textile fabrics are compressible, the thickness measured will depend upon the pressure...
Notice of Intent
Flammability of soft floor coverings —Sampling...
This standard establishes sampling plans and procedures to determine the acceptability with respect to flammability of soft floor coverings using a sequential sampling procedure. The procedures described in this standard are...
Notice of Intent
Agricultural tractors - Instructional seat
This International Standard specifies the minimum design and performance requirements for an instructional seat and restraint designed for limited use by a trainer, trainee or service person inside the enclosed cab of an...
Notice of Intent
Standard Method of Fire Tests for Air Filter ...
These requirements cover air filter units of both washable and throw-away types for removal of dust and other airborne particles from air circulated mechanically in equipment and systems.
Notice of Intent
Standard for Heat Shields
1.1 These requirements cover the construction and performance of heat shields for vertical installation between heat producing appliances, chimney connectors and combustible construction. 1.2 Heat shields are intended for...
Notice of Intent
High exposure fenestration installation
To develop a Standard for high exposure fenestration installation incorporating climate change adaptation provisions.
Notice of Intent
Textile test methods — Wool — Determination ...
This International Standard specifies the procedure and the conditions of measurement for the determination of wool fibre diameter by means of the projection microscope.
Notice of Intent
Textile floor coverings — Vocabulary
This International Standard gives definitions of terms relating to textile floor coverings, and defines categories of these products.
Notice of Intent
Standard for Egress Door Securing and Releasing...
This Standard covers the physical and performance requirements for egress door securing and releasing devices that are intended to hold a door in the closed position and releasing the door to permit free egress when operated...
Notice of Intent
Inspection and Testing of Fire Alarm Systems
CAN/ULC-S536 provides requirements for the inspection and testing of fire alarm systems and specifies the devices and functions to be inspected, tested, and documented for the periodic inspection and test. The Standard is...
Notice of Intent
Verification of Fire Alarm Systems
CAN/ULC-S537 prescribes inspection and test procedures for the purpose of verifying that the fire alarm system is installed in conformance with the design, and with CAN/ULC-S524, Standard for Installation of Fire Alarm...
Notice of Intent
Equipment for Fire Signal Receiving Centres and...
CAN/ULC-S559 covers requirements for fire signal receiving centres and systems, which include transmitting and receiving equipment, proprietary fire receiving centre equipment and control unit accessories. Fire signal...