Search

This method determines the ability of a fabric to recover from creasing such as might occur during normal wear. It does not necessarily reflect the resistance of a fabric to wrinkling. Attention is drawn to the fact that for...

This method is intended for use in determining the resistance of textile materials to water vapour diffusion. Three options are available for testing, allowing for the resistance to water vapour diffusion of a textile...

This method determines loss in strength and yellowing of woven or knitted fabrics due to chlorine retained in laundering operations involving the use of chlorine bleach and followed by pressing. It may be used on any fabric...

This method determines the immediate stretch and recovery characteristics of elastic fabrics. Fabrics can be tested in full width or in the form of strips cut from the sample. Characteristics dependent upon time and upon...

This part of ISO specifies a method for deter­ mining the resistance of the colour of textiles of all kinds and in all forms to ironing and to processing on hot cylinders. Tests are given for hot pressing when the tex­ tile...

This part of ISO 7211 specifies a method for the determination of crimp of yarn in fabric. The method is applicable to most woven fabrics but is unsuitable for fabrics manufactured in such a way as to render removal of the...

This part of ISO 105 is designed as a reference document to support the proper measurement of the colour of specimens by instrumental means as required in many parts of ISO 105. The document describes general concepts and...

This part of ISO 6741 specifies specimen cleaning procedures to be used when the commercial mass is to be determined in accordance with ISO 6741-1 on a clean and dry basis. The procedure appropriate for a particular fibre is...

This part of ISO 105 specifies the terms and definitions on colour measurements that are used throughout ISO 105. These definitions are intended to be used only within the context and scope of ISO 105.

Specifies requirements for the development, validation and routine control of a moist heat sterilization process for medical devices

Specifies particular requirements for washer disinfectors (WD) that are intended for use for the cleaning and thermal disinfection, in a single operating cycle, of re-usable medical devices such as surgical instruments...

Specifies particular requirements for washer-disinfectors (WD) that are intended to be used for emptying, flushing, cleaning and thermal disinfection of containers used to hold human waste for disposal by one operating cycle